Specification Guide

Product Specication Revised 4/21
2" (5.1) min
2 1/2"
(6.4)
min
2" (5.1)
min
3/4" thick platform
required
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
C
L
GAS
21"
(53.3)
9 1/4"
(23.5)
31 1/4"
(79.4)
27 1/4"
(69.2)
ZET1PHSS
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC. ELEC.
ELEC
Wall oven
Cooktop
GAS
ELEC
Wall oven
HELPFUL TIPS
For questions about your
appliance, please call 1-800-626-2000.
PAGE 4 OF 4
2" (5.1) min
2 1/2"
(6.4)
min
2" (5.1)
min
3/4" thick platform
required
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
C
L
GAS
21"
(53.3)
9 1/4"
(23.5)
31 1/4"
(79.4)
27 1/4"
(69.2)
ZET1PHSS
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC. ELEC.
ELEC
Wall oven
Cooktop
GAS
ELEC
Wall oven
INSTALLATION WITH ADVANTIUM
AND WARMING DRAWER
SIDE BY SIDE INSTALLATION
A
Dimensions per Advantium or
Microwave Oven requirements
B
Dimension per Warming
Drawer requirements
C
Note this oven is only approved
to be installed under specic
models as labeled on this unit.
D
Support platform made of 3/4"
(1.9 cm) wood is required. Must
be capable of supporting 220 lbs
(99 kg). Support Platform base to
be same height as toe kick.
E
Junction box location for wall
oven. (May also be located in
adjacent cabinet).
F
Gas regulator and electric
connections for cooktops must be
located in an adjacent accessible
location to the right
G
Top and/or side llers may be
necessary if unit is positioned
between existing cabinets. Be
sure they are attached securely,
since they will anchor the oven
in the cabinet.
H
For ush oven installations,
the cooktop cutout must be set
back 2 1/2" (6.4cm) plus the
cleat setback.
I
Dimension varies based on
model. Example:
ZGU36 5 1/2" (14.0cm) from
wall ZGU30 4 5/16" (11.0cm)
from wall
J
Dimension varies based on
model. Example:
ZGU36 0" (centerline)
ZGU30 12 1/16" (30.6cm)
(centerline)
K
Dimension varies based on
model. Example:
ZGU36 5 1/2" (14.0)cm,
requires use of 90° 1/2" FPT
x 1/2" FL brass street elbow
ZGU30 5" (12.7cm)
L
Minimum 31 1/4" from the top
surface of the countertop to
the top surface of the wall oven
support platform when installed
beneath a certied cooktop.
UNDER COOKTOP INSTALLATION
J
I
H
C
D
E
F
G
A
B
K
L
23 1/2" (59.7) min
cutout depth
27 1/4"
(69.2)
32 1/2" (82.6)
Recommended and
16 1/4" (41.3) min
Cutout location
from floor
2"
(5.1) min
2"
(5.1) min
STANDARD
INSTALLATION
STANDARD INSTALLATION
SIDE VIEW
ZET1FHSS
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.