Owner's Guide
49-2000865 Rev. 2 15
WARNING
Consuming undercooked food can result in food-borne illness. Use probe according to 
the following instructions to ensure all portions of the food reach minimum safe cooking temperatures. 
Recommendations for minimum safe food temperatures can be found at foodsafety.gov or IsItDoneYet.gov.
Always check the temperature at multiple locations in the food with a food thermometer after cooking to ensure 
that all portions of the food have reached the minimum safe internal temperature for that food.
Proper Probe Placement 
After preparing the meat and placing it on the cooking pan 
follow these instructions for proper probe placement.
Ŷ ,QVHUWWKHSUREHLQWRWKHIRRGVRWKDWWKHWLSRIWKH
probe will rest in the center of the thickest part of 
the food. For best performance the probe should 
be fully inserted into the food. If the probe is not 
located properly, it may not accurately measure the 
temperature of the coolest portion of the food. Some 
foods, particularly small items, are not well suited for 
FRRNLQJZLWKWKHSUREHGXHWRWKHLUVKDSHRUVL]H
Ŷ 7KHSUREHVKRXOGQRWWRXFKERQHIDWRUJULVWOH
Ŷ )RUZKROHSRXOWU\LQVHUWWKHSUREHLQWRWKHWKLFNHVWSDUW
of the breast. 
Ŷ )RUERQHOHVVURDVWVLQVHUWWKHSUREHLQWRWKHFHQWHURI
the roast. 
Ŷ )RUERQHLQKDPRUODPELQVHUWWKHSUREHLQWRWKH
center of the lowest large muscle or joint. 
Ŷ )RUFDVVHUROHVRUGLVKHVVXFKDVPHDWORDILQVHUWWKH
probe into the center of the dish.
Ŷ )RUILVKLQVHUWWKHSUREHIURPMXVWDERYHWKHJLOOLQWR
the meatiest area, parallel to the backbone.
Probe Usage
To use the probe without preheating:
1.  Insert the probe into the food (see Proper Probe 
Placement).
2.  Place the food in the oven and connect the probe into 
the probe outlet in the oven.
3.  Select the desired cooking mode and temperature. 
%HIRUHSUHVVLQJVWDUWSUHVVWKHProbe icon at the bottom 
right of the screen. The probe setting screen will be 
displayed. Enter the desired internal food temperature 
and press Start. The probe temperature can be set 
between 100°F and 200°F.
To use the probe with preheating:
1.  Press the desired cook mode (Traditional Bake, 
Convection Bake, or Convection Roast) pad and enter 
the desired cooking temperature.
2.  Insert the probe into the food (see Proper Probe 
Placement).
3.  Once the oven is preheated, place the food in the oven 
and connect the probe to the probe outlet, making sure 
it is fully inserted. Use caution, the oven walls and 
probe outlet are hot.
4.  The oven will detect that the probe has been inserted 
and the probe setting screen will be displayed. Enter 
the desired internal food temperature and press Start. 
The probe temperature can be set between 100°F and 
200°F.
Probe Care Guidelines
NOTE: some double oven models have a probe in the 
upper oven only.
Ŷ 8VHRISUREHVRWKHUWKDQWKHRQHSURYLGHGZLWKWKLV
product may result in damage to the probe.
Ŷ 8VHWKHKDQGOHVRIWKHSUREHDQGSOXJZKHQLQVHUWLQJ
and removing them from the meat and outlet
Ŷ 7RDYRLGGDPDJLQJ\RXUSUREHGRQRWXVHWRQJVWRSXOO
on the cable when removing it.
Ŷ 7RDYRLGEUHDNLQJWKHSUREHPDNHVXUHIRRGLV
completely defrosted before inserting the probe.
Ŷ 7RSUHYHQWSRVVLEOHEXUQVGRQRWXQSOXJWKHSUREH
from the outlet until the oven has cooled.
Ŷ 1HYHUOHDYHWKHSUREHLQVLGHWKHRYHQGXULQJDVHOIRU
steam clean cycle.
Ŷ 'RQRWVWRUHWKHSUREHLQWKHRYHQ
USING THE OVEN
PROBE
Internal food temperature is frequently used as an indicator of doneness, especially for roasts and poultry. The Probe mode 
monitors the internal food temperature and turns the oven off when the internal food temperature reaches the programmed 
temperature.










