Installation Guide

2 B
CUTOUT FOR DOUBLE OVENS (2 THERMAL
OVENS)
NOTE: If the cabinet does not have a front frame and the sides are less than ¾” (1.9 cm) thick,
shim both sides equally to establish the cutout width.
Dim. Description
30” Double Oven with
Pedestal
30” Double Oven without
Pedestal
A Cabinet Width 30” (76.2 cm) 30” (76.2 cm)
B Cutout Width 28
1
»2” (72.4 cm) min.
28
5
»8” (72.7 cm) max.
28
1
»2” (72.4 cm) min.
28
5
»8” (72.7 cm) max.
C Cutout Height 51
13
»16” (131.6 cm) min.
51
15
»16” (131.9 cm) max.
50 ¼” (127.64cm)
D Clearance from cutout - side
edges*
11
»16” (1.75 cm)
11
»16” (1.75 cm)
E Clearance to Adjacent Corners,
Drawers, Walls, etc., When Door
Is Open
23” (53.3 cm) min. 23” (53.3 cm) min.
F Clearance from cutout - top* 1” (2.5 cm) min. 1” (2.5 cm) min.
G Clearance from cutout -
bottom*
1
1
»4” (3.2 cm) 1
1
»4” (3.2 cm)
H Junction Box Location 9
1
»2” (24.1 cm) max.
right side only
9
1
»2” (24.1 cm) max.
right side only
K Minimum Cutout Location from
Floor
12” (30.5 cm) 12” (30.5 cm)
P Junction Box location 5-1/4” (13.34 cm) max. 5-1/4” (13.34 cm) max.
R Junction Box location 2-1/2” (6.35 cm) max. 2-1/2” (6.35 cm) max.
2 A
CUTOUT FOR SINGLE OVENS IN WALL CABINET
NOTE: If the cabinet does not have a front frame and the sides are less than ¾” (1.9 cm) thick,
shim both sides equally to establish the cutout width.
These ovens
are not
approved for
installations
that stack one
single wall
oven above
another single
wall oven.
Cutout –
observe all
dimensions and
requirements.
Cutout –
observe all
dimensions and
requirements.
2” (5.1 cm) Min.
30.5” (77.5 cm)
30” models
Center Line Center Line
Side-by-Side Installations
Install two ovens in separate cutouts.
Continue to Section 3.
H
R
P
B
F
G
C
D
A
E
Junction
Box
Location
(junction
box may
be located
in adjacent
cabinet)
Cutout Depth
23-1/2”
(59.7 cm) Min.
Recommended
Cutout Location
from Floor
32-1/2” (82.6 cm)
16-1/4” (41.3 cm) Min
Opening
Between Inside
Walls Must be
at Least 28-1/2”
(72.4 cm) Wide
H
P
R
B
C
K
F
G
D
A
E
Junction
Box
Location
(junction
box may
be located
in adjacent
cabinet)
Cutout Depth
23-1/2”
(59.7 cm) Min.
NOTE: Allow
1/4” (0.64 cm)
clearances from
side edges of
oven door.
NOTE: Allow
1/4” (0.64 cm)
clearances from
side edges of
oven door.
Dimension Dimension Description 30” Single Oven
A Cabinet Width 30” (76.2 cm)
B Cutout Width 28
1
»2” (72.4 cm) min.
28
5
»8” (72.7 cm) max.
C Cutout Height 27
1
»4” (69.2 cm) min.
27
5
»16” (69.4 cm) max.
D Clearance from cutout - side edges*
11
»16” (1.75 cm)
E Clearance to Adjacent Corners, Drawers,
Walls, etc., When Door Is Open
23” (53.3 cm) min.
F Clearance from cutout - top* 1” (2.5 cm) min.
G Clearance from cutout - bottom* 1
1
»4” (3.2 cm)
H Junction Box Location 9
1
»2” (24.1 cm) max. right side only
P Junction Box location 5-1/4” (13.34 cm) max.
R Junction Box location 2-1/2” (6.35 cm) max.
* Refers to minimum clearance required for wall oven installation and does not reflect actual product dimensions.
* Refers to minimum clearance required for wall oven installation and does not reflect actual product dimensions.