Specification Sheet

PAGE 5 OF 5
For questions about your
appliance, please call 1-800-626-2000.
HELPFUL TIPS
Product Specication Revised 1/22
3/4" thick
platform
required
30" (76.2) flush inset width
with
1/8" (0.3) reveals
30" (76.2)
1 3/8"
(3.5)
27 1/4"
(69.2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
Side cleat
Top cleat
Bottom cleat
5 1/4"
(13.3)
9 1/2"
(24.1)
28 1/2" (72.4)
cutout width
3/4"
(1.9)
Side cleats
1 1/8"
(2.8)
Top cleat
9/16" (1.4)
Bottom cleat
(Extends full depth of cabinet)
28 15/16"
(73.5)
Flush inset
height with
1/8" (0.3)
reveal at top
and bottom
3/4"
(1.9)
5 1/4"
(13.3)
3
(7.6)
9 1/2"
(24.1)
28 1/2" (72.4)
min cutout width
23 1/2"
(59.7) min cutout depth
27 1/4"
(69.2)
31 1/4"
(79.4) min
24 7/8"
(63.1)
cutout depth
24 7/8" (63.1)
cutout depth
23 1/2"
(59.7)
min cutout depth
2 1/2"
(6.4)
Side cleats
depth
TOP VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
FRONT VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
ZET9050SHSS
ELEC.
ELEC.
3/4" thick
platform
required
30" (76.2) flush inset width
with
1/8" (0.3) reveals
30" (76.2)
1 3/8"
(3.5)
27 1/4"
(69.2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
Side cleat
Top cleat
Bottom cleat
5 1/4"
(13.3)
9 1/2"
(24.1)
28 1/2" (72.4)
cutout width
3/4"
(1.9)
Side cleats
1 1/8"
(2.8)
Top cleat
9/16" (1.4)
Bottom cleat
(Extends full depth of cabinet)
28 15/16"
(73.5)
Flush inset
height with
1/8" (0.3)
reveal at top
and bottom
3/4"
(1.9)
5 1/4"
(13.3)
3
(7.6)
9 1/2"
(24.1)
28 1/2" (72.4)
min cutout width
23 1/2"
(59.7) min cutout depth
27 1/4"
(69.2)
31 1/4"
(79.4) min
24 7/8"
(63.1)
cutout depth
24 7/8" (63.1)
cutout depth
23 1/2"
(59.7)
min cutout depth
2 1/2"
(6.4)
Side cleats
depth
TOP VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
FRONT VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
ZET9050SHSS
ELEC.
ELEC.
A
Junction box location
(May also be located in adjacent
cabinet.)
B
Platform must be able to support
220 lbs (99 kg).
C
Cabinet surfaces must be an
appearance nished surface for
ush installation.
D
Cleats may be visible and should
be nished to match cabinetry.
E
If using optional ush install vent
trim accessory ZX30VT1, please
adjust cutout height to 28-5/8"
and bottom cleat height to 1/4".
UNDERCOUNTER INSTALLATION
Allow 1/8" (0.3 cm) clearances from side edges of oven door.
A
B
B
E
C
D
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
WALL INSTALLATION