Specification Sheet (Flush Installation)
PAGE 2 OF 2 Product Specication Revised 11/21
HELPFUL TIPS
For questions about your
appliance, please call 1-800-626-2000.
23 1/2" (59.7)
min cutout depth
12"
(30.5)
Recommended
cutout location
from floor
1"
(2.5) min
2"
(5.1) min
50 1/4"
(127.6)
51 9/16"
(130.9)
Flush inset
height with
1/8" (0.3)
reveal at top
and 1/4" (0.6)
reveal at bottom
24 15/16" (63.3)
min cutout depth
28 1/2" (72.4)
cutout width
30" (76.2)
5 1/4"
(13.3)
9 1/2"
(24.1)
2 1/2"
(6.4)
Side cleats
depth
1 3/8"
(3.5)
30" (76.2) flush inset width
with
1/8" (0.3) reveals
5/8"
(1.6)
Top cleat
11/16" (1.7)
Bottom cleat
(Extends full depth
of cabinet)
3/4"
(1.9)
Side cleats
STANDARD
INSTALLATION
STANDARD INSTALLATION
SIDE VIEW
ELEC.
ZET9550SHSS
top
cleat
side
cleat
bottom
cleat
TOP VIEW
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
WALL INSTALLATION
A
Junction box location
(May also be located in adjacent
cabinet.)
B
Platform must be able to support
400 lbs (181 kg)
C
Cabinet surfaces must be an
appearance nished surface for
ush installation.
D
Cleats may be visible and should
be nished to match cabinetry.
E
If optional ush install vent
trim accessory ZX30VT2 is
ordered, please adjust cutout
height to 51-1/8" and bottom
cleat height to 1/4".
Allow 1/8" (0.3 cm) clearances from side edges of oven door.
A
B E
D
C
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.