Quick Specification - Flush Installation

HELPFUL TIPS
For questions about your
appliance, please call 1-800-626-2000.
PAGE 2 OF 2 Product Specication Revised 4/22
FLUSH INSET INSTALLATION
FRONT VIEW
TOP VIEW
25 1/4"(64.1)
cutout width
ELECTRICAL
17 1/2"
(44.5)
20 1/2"
(52.1)
Side cleats
30" flush inset width
with 1/8" reveals
2 3/8"(6.0)
Top cleat
1 7/8"(4.8)
Bottom cleat
(Extends full depth of cabinet
less side cleat setback)
Allow 1/8” (0.3) clearances from
side edges of oven door
1 1/8"(2.9)
B
C E
Flush inset
height
With 1/8”
reveal at top
and bottom
1 7/16"
(3.7)
Side cleats
ELECTRICAL
FLUSH INSET
INSTALLATION
23 1/2" min
(59.7)
cutout depth
Top cleat
Side cleat
Bottom cleat
D
23 1/2" min (59.7)
cutout depth
17 1/2"
(44.5)
36 3/4"
(93.3)
STANDARD
INSTALLATION
17 1/2"
(44.5)
23 1/2" min (59.7)
cutout depth
Dimension varies
25 1/4" (64.1)
cutout width
23 1/2" min (59.7)
cutout depth
FLUSH INSET
INSTALLATION
STANDARD INSTALLATION
FRONT VIEW
STANDARD
INSTALLATION
Minimum
cutout
location
from floor
ZSB9132NSS
WALL INSTALLATION
A
Junction box location (May also
be located in adjacent cabinet.)
B
Platform must be able to
support cabinet load, weight of
oven, and additional oven loads.
C
Top surface of cabinet must be
an appearance nished surface
for ush installation.
D
Cleats may be visible and
should be nished to match
cabinetry.
For more details, refer to the installation instructions for this product on Monogram.
com. Dimensions in parentheses are in centimeters unless otherwise noted.
C
A
DB