Owner's Manual

Product Specication Revised 1/22
HELPFUL TIPS
For questions about your
appliance, please call 1-800-626-2000.
PAGE 4 OF 4
2"
(5.1) min
2"
(5.1) min
STANDARD INSTALLATION
SIDE VIEW
2" (5.1) min
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
ELEC. ELEC.
3/4" thick platform
required
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
GAS
31 1/4"
(79.4)
27 5/8"
(70.2)
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC.
Wall oven
Cooktop
GAS
ELEC.
Wall oven
INSTALLATION WITH ADVANTIUM
AND WARMING DRAWER
SIDE BY SIDE INSTALLATION
C
I
H
L
J
K
E
F
J
A
Dimensions per Advantium or
Microwave Oven requirements
B
Dimension per Warming
Drawer requirements
C
Note this oven is only approved
to be installed under specic
models as labeled on this unit.
D
Support platform made of 3/4"
(1.9 cm) wood is required.
Must be capable of supporting
220 lbs (99 kg). Support
Platform base to be same height
as toe kick.
E
Junction box location for wall
oven. (May also be located in
adjacent cabinet).
F
Gas regulator and electric
connections for cooktops
must be located in an adjacent
accessible location to the right
G
Top and/or side llers may be
necessary if unit is positioned
between existing cabinets. Be
sure they are attached securely,
since they will anchor the oven
in the cabinet.
H
For ush oven installations,
the cooktop cutout must be set
back 2 1/2" (6.4 cm) plus the
cleat setback.
I
Dimension varies based on
model.
example: ZGU30 4 5/16"
(11.0 cm) (from wall)
J
Dimension varies based on
model.
example: ZGU30 12 1/16"
(30.6 cm) (centerline)
K
Dimension varies based on
model.
example: ZGU30 5" (12.7 cm)
L
From the top surface of the
countertop to the top surface of
the wall oven support platform
UNDER COOKTOP INSTALLATION
A
B
D
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.