Installation Guide

31-1000699 Rev. 0
01-23 GEA
Printed in the United States
Installation Instructions
INSTALL STAINLESS PANEL
Ŷ Remove bottom hinge cover and retain the 4 T30 Torx
screws for later installation.
Ŷ Open door to 90°. Slide the panel onto the door with
the panel brackets interlocking on top and bottom with
the door brackets (make sure not to slide the panel into
the cabinetry surround). Center the panel on the door,
then slowly close the door while watching to make sure
the panel does not contact the surrounding cabinetry.
Ŷ With the door fully closed, carefully slide the panel
towards the cabinetry with the goal gap of 1/8”.
FOLLOW THE REMAINDER OF THE STAINLESS
DOOR PANEL INSTALLATION INSTRUCTIONS
IN THE UNIT INSTALLATION INSTRUCTIONS TO
ADJUST AND SECURE THE DOOR PANEL.
INSTALL TOE KICK
Ŷ,QVHUW7RH.LFNLQWRWKHVORWLQWKH)URQW$FFHVV&RYHU
by rotating it toward you.
Ŷ3XVKWKHERWWRPSRUWLRQRIWKH7RH.LFNWRZDUGVWKH
product and slide into place.
Bottom
Hinge
Cover
T30 Torx
Screws
Door
Bracket
Panel
Bracket
Panel
1/8” gap
Cabintery
Surround
Overlay
Panel
Stainless
Steel Toe
Kick
Instructions for this kit are also included in the full installation instructions included with the unit.
For the full owner’s manual, visit our website at monogram.com.
Pour une version française du manuel du propriétaire complet, visitez notre site Web à monogram.com.
Para obtener una versión en español del manual del propietario completo, visite nuestro sitio web en
monogram.com.