Specifications

Installation Options

COOKTOP INSTALLATION OVER A

MONOGRAM WARMING DRAWER,

MODEL ZTD910 OR ZKD910

These cooktops may be installed over a 30″

or 27″ Warming Drawer. Both the cooktop and

the warming drawer must be installed according to

each specific installation instruction. For accurate

planning, review the Warming Drawer Installation

Instructions in advance; order Pub. No. 49-8937.

Use a 36″ or wider base cabinet.

• Plan gas supply location carefully to avoid

interference with the warming drawer.

POWER SUPPLY:

If local codes permit, the cooktop and warming

drawer may operate from the same 120V duplex

outlet. Refer to installation instructions for details.

Install 2x4 or 2x2 anti-tip block against

rear cabinet wall 9″ from cutout floor

to bottom of block

23-1/2″ min.

Cooktop 33-7/8″

19-1/8″

2-1/2″ min.

1-1/2″ cabinet top

5-1/2″ min.

NOTE: When installing a Monogram Warming Drawer

below a cooktop, a solid barrier must be installed at least

1″ from the lowest point of the bottom of cooktop

burner box to the top of cutout. See Warming Drawer

Installation Instructions for details.

36″

countertop

height

9-1/4″

25″

9″

Dim. A

ZTD910 28-1/2″

ZKD910 25-1/2″

www.dexpress.com Page 8 of 42 12/1/2010

ZGU385NSMSS

Cond Inst