Owner`s manual

Installation Instructions
[STEP 12 CONNECT POWER
• Check to be sure the power cord is plugged into
tile receptacle.
L_
"\', Elec'trical
MasterLight Outlet
Switch
• Check to make sure power to refligerator is on by
opening refligerator door to see if interior lights
are oil.
• Tile temperature controls are preset at 37°F for tile
fresh food secOon and 0°F for tile freezeL
• Allow 24 hours to stabilize before making
adj tlsQIleIltS.
[STEP 13] START ICEMAKER
• Flip tile switch to I (ON). Tile icemaker will begin
operation automatically.
• Be stlie nothing interferes with tile sweep of tile
feeler arm.
• Discard tile first fifll bucket of ice cubes.
• To turn tile icemaker off; set tile switch to O
(OFF).
STEP 14 INSTALL TOEKICK
• I,ocate tile supplied toekick (shipped roped to
tile side of tile refligerator). Install with 2 screws
provided, adjust to desired height and tighten
scIews.
• A custom toekick can be installed to match or
complement tile surrounding cabinetry. Use tile
supplied toekick as a template to cut tile shape.
SuppliedToekick
[ t. _.t,
%
%
1/4"orThickerToekick
=====_. "%,
%
INSPECT FINAL INSTALLATION
Check door alignment
Stand back away flom tile refrigerator to inspect tile
final installation.
• Check to be sure handles are evenly aligned with
each other at tile top. To adjust, loosen handle
screws and slide up or down. Tighten screws.
• During shipping or tile addition of heaxT door
panels may have caused tile doors to move slightly
out of alignment.
----q
"DoorOutof
Alignment
/
\
/
\\
• If necessary, tile flesh food door may be adjusted
up or down to align with tile fleezer dooL
• Use a 5/16" wrench to adjust tile hinge pin as
S tl O_'V II.
18