Owner`s manual

Installation Instructions

STEP 8 INSTALL GRILLE PANEL

To insert fiamed or overlay panel into the grille:

• Raise the grille panel to stop position.

Id" Lotqosen

Loosen

Side Side

Trim Trim

Screw Screw

AdjustNut Below

Springto Accommodate

PanelWeight

• Loosen screws on side uim behind flame. Remove

bottom trim.

• Slide panel over the metal backer panel and into

the trim.

• If necessary, mp with a wood block until panel slips

under the top uim piece.

• Reassemble bottom trim. Tighten screws.

• Adjust the hinge spring to accommodate the panel

weight, if necessa_ T.