Quick Specification

Product Specication Revised 6/20
For questions about your
appliance, please call 1-800-626-2000.
HELPFUL TIPS
PAGE 3 OF 4
FRONT VIEW SIDE VIEW
W
24" (61.0)
2 1/4"
(5.7)
4 3/8"
(11.1)
7/16" (1.1)
Trim overlap
3 1/2"
(8.9)
E
WATER
35 1/2" (90.2)
12" (30.5)
*84"
+
-
.500
(213.36)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
6 3/4"
(17.1)
6 3/4"
(17.1)
5"
(12.7)
5"
(12.7)
ZISS360DXSS
SIDE VIEW INSTALLED
WITH WOODEN WALL STUDS
AND NO SOFFIT
SIDE VIEW INSTALLED
UNDER SOFFIT
SOFFIT
*84"
(213.4)
*Or installation
height from floor
2" x 4"
Cut to 35" Length
Screws mounted
into vertical wall
studs
FRONT VIEW INSTALLED
WITH METAL WALL STUDS
AND NO SOFFIT
Top Case Trim
3/4"
Min.
Side View Top
Case Trim
Install Screws
Through Trim and Into
3/4" Min. Wood Brace
STANDARD INSTALLATION
ANTI-TIP BRACKET
FRONT VIEW SIDE VIEW
W
24" (61.0)
2 1/4"
(5.7)
4 3/8"
(11.1)
7/16" (1.1)
Trim overlap
3 1/2"
(8.9)
E
WATER
35 1/2" (90.2)
12" (30.5)
*84"
+
-
.500
(213.36)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
6 3/4"
(17.1)
6 3/4"
(17.1)
5"
(12.7)
5"
(12.7)
ZISS360DXSS
SIDE VIEW INSTALLED
WITH WOODEN WALL STUDS
AND NO SOFFIT
SIDE VIEW INSTALLED
UNDER SOFFIT
SOFFIT
*84"
(213.4)
*Or installation
height from floor
2" x 4"
Cut to 35" Length
Screws mounted
into vertical wall
studs
FRONT VIEW INSTALLED
WITH METAL WALL STUDS
AND NO SOFFIT
Top Case Trim
3/4"
Min.
Side View Top
Case Trim
Install Screws
Through Trim and Into
3/4" Min. Wood Brace
A
B
D
C
E
The refrigerator will project forward, slightly beyond adjacent cabinetry.
A
Mounting the junction box in this location
will also allow for front accessibility
through access panel.
B
Water supply area.
WARNING:
The refrigerator is top heavy and must be
secured to prevent the possibility of tipping
forward. Failure to do so may result in
death or serious injury.
The information below is for cabinet
design only. When installing the anti-
tip system you must use the product
installation instructions.
Determine your installation construction
and required anti-tip conguration:
C
Installed Under Sot
After installing unit into installation
opening, raise grille panel and screw
metal case sides to adjacent cabinet.
When installed under a sot, the sot
cannot exceed 24" deep. The top case trim
overlaps the bottom of the sot.
D
Wooden Wall Studs and No Sot
• Cut a 2" x 4" block and secure to
brackets provided.
• Secure brackets to back wall of opening
at 84" or your installation height from
the oor.
E
Metal Wall Studs and No Sot
This method requires securely fastened
cabinets on both sides and a 3/4"
minimum wood brace above unit, with it’s
front surface 24" from back wall.
• After installing unit into opening, raise
grille panel and attach metal case top trim
to 3/4" minimum wood brace.
• The brace spanning the enclosure must
be securely fastened to cabinets on both
sides.
See Installation Instructions for detailed
instructions.