Quick Specification
For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses are in centimeters unless
otherwise noted. Actual product dimensions may
vary due to manufacturing tolerances.
OVERALL DIMENSIONS
PAGE 2 OF 4 Product Specication Revised 6/20
Door
Angle
90°
115°
130°
**Dim A
2 7/16" (6.2)
8 1/8" (20.6)
10 3/4" (27.3)
**Dim B
2 7/16" (6.2)
9 3/4" (24.8)
13 5/16" (33.8)
36" (91.5)
25 3/4" (65.4)
23 1/2" (59.7)
*84"
(213.4)
*3 7/8"
(9.8)
2 1/8"
(5.4)
*72 5/16"
(183.7)
*83 1/2"
(212.1)
11 3/16"
(28.4)
34 7/16"
(87.5)
38 3/4"
(98.4)
35" (89.0)
Case width
20 9/16"
(52.2)
TOP VIEW
ZISS360DXSS
SIDE VIEWFRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 4 1/8" (10.5) min
clearance to a wall for 90˚
door swing
** Allow 4 1/8" (10.5) min
clearance to a wall for 90˚
door swing
** These refrigerators are equipped with a 3-position door stop. The factory-set 115° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow
full 130° door swings for pan removal. If the 90° door stop position is used, pan access is
maintained, but pan removal is restricted.
Allow **Dim A
min clearance
for door swing
Allow **Dim B
min clearance
for door swing
*29 9/16"
(75.1)
SPECIFICATIONS
Overall Width 36" (91.44 cm)
Overall Height 84" (213.36 cm)
Overall Depth 25 3/4" (65.41 cm)
Door Clearance 20 9/16 (52.2 cm)
Cutout Width 35 1/2" (90.2 cm)
Cutout Height 84" +/- .500
(213.36 cm)
Cutout Depth 24" (61 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 675 lb
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply is required.
An individual properly grounded branch circuit or
circuit breaker is recommended. Install a properly
grounded 3-prong electrical receptacle recessed into
the back wall.