Installation Guide

8
DIMENSIONS AND CLEARANCES
Product Clearances
These refrigerators are equipped with a 3-position door
stop. The factory-set 115° door swing can be adjusted
to 130°, or to 90° on panel models or 90° on stainless
steel models if clearance to adjacent cabinets or walls is
restricted.
Panel Models Only: Allow minimum clearances for
the freezer door (Dimension A) and fresh food door
(Dimension B) for a full 130° door swing and to allow for
pan removal.
For a 90° door swing, allow 4 9/16” (11.59 cm) min.
clearance to a wall. If the 90° door stop position is used,
pan access is maintained, but pan removal is restricted.
See the illustrations on pages 12 and 13 to determine
door swing interaction with adjacent cabinets or
countertops.
Design Guide - Standard Installation
ZIS480
ZISB48
AB C
90° 4-9/16”
(11.59 cm) 4-9/16” (11.59 cm) 28-5/8” (72.71 cm)
130° 15” (38.1 cm) 20” (52.23 cm) 28-5/8” (72.71 cm)
ZIS420
ZISB42
AB C
90° 4-9/16”
(11.59 cm) 4-9/16” (11.59 cm) 26-9/16” (67.47 cm)
130° 13” (33.02 cm) 19” (48.26 cm) 26-9/16” (67.47 cm)
ZISB36 A B C
90° 4-9/16”
(11.59 cm) 4-9/16” (11.59 cm) 20-9/16” (52.23 cm)
130° 13” (33.02 cm) 15” (38.1 cm) 20-9/16” (52.23 cm)
* Shipping height. The
refrigerator can be
adjusted to fit into a
cutout that is 84-1/2”
(214.63 cm) in
height. Use leveling
legs and wheels
for a maximum 1”
(2.54 cm) height
adjustment.
*84"
From
Floor
25-3/8" Framed Models
Depth Including 3/4” panel, 25-15/16”
36", 42" or 48"
Frame to Frame
35 1/2", 41 1/2",
or 47 1/2"
Case Width
*84 1/2” max
83-1/2" min
at Rear
B
A
130° Door Swing
(Panel Models Only)
90° Door Swing
23-5/8"
Behind
Frame
C
*4 9/16” Min.
Distance to Wall
115° Door Swing
B
A
Dimensions based on custom handles height of
2 9/16” ( 6.51 cm).
31-1000450 Rev. 0