Installation Guide

Installation Instruction - Stainless Steel Installation

STEP 13 INSTALL TOEKICKS

• Locate the supplied toekicks (shipped taped to the

side of the refrigerator.

• Attach the LARGER toekick to the refrigerator using

ONLY the top center hole (1).

• Attach the toekick skirt to the refrigerator using the

three lower slots (2).

• A custom toekick can be installed to match or

complement the surrounding cabinetry. Use the

supplied toekick as a template to cut the shape.

INSPECT FINAL INSTALLATION

Check door alignment. Stand back away from the

refrigerator to inspect the final installation.

• Check to be sure the handles are evenly aligned

with each other at the top. To adjust, loosen the

handle screws and slide up or down. Tighten the

screws.

• Shipping or the addition of heavy door panels may

have caused the doors to move slightly out of

alignment.

• If necessary, the fresh food door may be adjusted

up or down to align with the freezer door.

• Use a 5/16” wrench to adjust the hinge pin as

shown.

Bushing

Door Hinge

Case Hinge

5/16" Wrench

Raise

Door Out of

Alignment

31-49171