Quick Specification

For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
OVERALL DIMENSIONS
PAGE 3 OF 14 Product Specication Revised 5/20
SPECIFICATIONS
Overall Width 42" (106.7 cm)
Overall Height 84" (213.36 cm)
Overall Depth 25 3/4" (65.4 cm)
Door Clearance 26 5/8" (67.6 cm)
Cutout Width 41 1/2" (105.4 cm)
Cutout Height 84±.500
(212.1 - 214.6 cm)
Cutout Depth 24" (61 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 725 lb (328.9 kg)
*84"
(213.4)
42" (106.7)
25 3/4" (65.4)
23 1/2" (59.7)
*72 5/16"
(183.7)
*83 1/2"
(212.1)
*38 3/4"
(98.4)
68 1/2"
(174.0)
*3 3/4"
(9.5)
41" (104.2)
Case width
26 5/8"
(67.6)
ZISB420DX
TOP VIEW
SIDE VIEWFRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 4 9/16" (11.6) min
clearance to a wall for 90˚
door swing
** Allow 4 9/16" (11.6) min
clearance to a wall for 90˚
door swing
** These refrigerators are equipped with a 3-position door stop. The factory-set 115° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted.
Allow full 130° door swings for pan removal. If the 90° door stop position is used, pan
access is maintained, but pan removal is restricted. Dimensions based on custom
handle height of 2 9/16" (6.5).
Allow
**
13" (33.0)
min clearance
for 130˚ door swing
Allow
**
19" (48.3)
min clearance
for 90˚ door swing
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply is required. An
individual properly grounded branch circuit or circuit breaker
is recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.
STANDARD INSTALLATION