Use & care guide

ZKHTSS1 for 3/4" Panels

Tubular Stainless Steel H;mctles

Step 5

Install

Assembled

Panels

(continued)

For models with full width dispenser trim and 2 piece

freezer panels:

It is best that 2 people perform this step.

• Carefully, lift the assembled panel to the case trim.

Hold both panels so they do not twist the extrustion.

• Insert the support bracket tabs into the bottom trim.

• Push and hold the panel back against the steel door.

• Reinstall original screws into the door extrustion.

• Open the door fully to stop.

• Install screws at the top, and hinge side.