Use & care guide

Option 2 Installation
ZKHT1 Trim Kit (For 3/4" Panels)
Support for Custom H:_nctles
Step 2
Install
custom handle
• Drill clearance holes through the handle bracket and
the dispenser trim.
• Install screw(s) long enough to pass through the
handle bracket, dispenser trim and into the
custom handle.
HandleBracket
-DispenserTrim
HandleBiacket
DispenserTrim
CustomHandle
Step 3
Mount
assembled
dispenser
trim
• Mount assembled dispenser trim with handle onto
the door.
• Drive 2 screws through the top and bottom of the
handle bracket into the steel door.
• Re-install 3 screws at top and bottom of dispenser
trim.
Important: Tile handle
bracketmustbe securedto tile
steel door. Ifit is not secured
properly,the dispensertrim will
pull awayfrom tile door.
Secure •
Assembled |
Dispenser |
Trim |
With L
Screws
Secure
Handle
Bracket
With
Screws
Again, refer to ZKT36 trim kit, Option 2.
• Follow Step 4 to install freezer door panels and bottom
trim.
• Slide freezer handle side extrusion in between panels
and steel door. Secure with screws.
• To install fresh food handle, follow the same proce-
dure as in Option 1
i
!{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{i
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]iii
-4
"_ Freezer
/Handle Side
Extrusion
37