Use & care guide

ZKHT1 Trim Kit (For 3/4" Panels)
Support for Custom Hi, holies
Tools and materials
required:
#2 Phillips screwdriver
Stubby Phillips screwdriver
Drill and appropriate bits
Custompanels
Customhandles
Safety glasses
Note: Thiskit mustbeusedin conjunctionwith ZKT36trim kit for
3/4" paneltrim,
These instructions are divided into 2options:
Option 1--For non-dispenser and dispenser models
using custom collar trim.
Option 2--For dispenser model using the standard
full-width trim.
Kit
contents
Parts List:
A. Fresh food door
extrusion
B. Freezer door extrusion
for non-dispenser
model and dispenser
model using custom
collar, (Option 1)
C. Freezer door extrusion
for dispenser model
using full-width trim,
(Option 2)
D. Freezer door handle
bracket for dispenser
model using full-width
trim, (Option 2)
OPTION 1
For non-dispenser
model
or dispenser model
using custom
collar trim
Before
you begin
This kit provides the necessary framework to install
custom handles of your choice, on 3/4"thick decorator
door panels. (Handles not included.) The door
extrusions and bracket allow custom handles to be
secured to the door structure, rather than the door
panels. This kit contains all the necessary parts for
dispenser and non-dispenser models. Follow the
instructions in Option 1 when applying custom handles
to a non-dispenser model or dispenser model using
custom collar trim. Follow the instructions in Option 2
for a dispenser model using the standard full-width
dispenser trim.
Note: Optimal final appearance
dependson carefulrouting
depth. Do not exceed1/4"
routing depth,
BackSide
I _-q T_E"
HandleSide HandleSide
FreezerPanel FreshFoodPanel
3/4" custom door panels must be routed to accommodate Refer to installation instructions for ZKT36 trim kit for
these door extrusions. Rout the panels as illustrated, a 3/4" custom panels Option 1.
maximum of 1/4" deep, and 1-13/16" wide, top to bottom • Follow Step No. 1to remove the standard aluminum
on the handle side. trim.
• Follow Step No. 2 and 3 to attach new 3/4" trim
pieces and install panel support brackets.
/
33