Use & care guide

ZKT36 Trim Kit

3/4 " Custonl Propels

Step 4

Install

panels

• Install the lower panel by slipping tabs into the slots

on the underside of the dispenser trim.

• Hold in position while fitting new bottom trim against

the bottom of the door. Tabs should protrude through

the bottom trim.

• Install screws up through the bottom trim using

stubby Phillips screwdriver.

• Open door and install screws through the back side of

the trim and into the panel at the hinge side.

• Place the upper panel onto the top of the dispenser

with tabs inserted into the slots.

• Push the panel back against the steel door.

• Open door and install screws through the back of the

trim and into the panel, at the top and hinge side.

Step 5

Install

handles

• Install door handle using original screws.

• Install panel on fresh food door using the same

procedure as in Option 1.

• Install grille panel using the same procedure as

in Option 1.