Use & care guide

Option 1 Installation

ZKT36 Trim Kit

3/4 " Custom P;mels

Step 3

Apply panel

support brackets

Dimension A

ZKT36-6-3/4"

Dimension B

ZKT367J/8"

BackSideDoorPanel_

Bottom Edge _-A

FreezerPanels

Bottom Edge

Fresh Food Panel

• Position support bracket on freezer panel,

dimension A, from the hinge side edge.

• Position support bracket on fresh food panel,

dimension B, from the hinge side edge.

• Secure support brackets to the bottom of the panels

with #4 screws provided. Align the brackets flush with

the bottom of the panels, with tabs protruding below.

• Bracket location measured from the hinge side, is the

same for panels with custom handles or standard

handles.

Step 4

Install panels

¢,

(

ZKT36 Install17screws

• Place the 3/4" panel on the bottom trim with support

bracket tabs inserted into slots. Push the panel back

against the steel door, making sure panel is flush to

hinge side trim.

• Carefully drill starter holes in panel using a small

drill bit.

• Attach the panel to the top and hinge side by installing

screws from the back of the trim through the wood

panel.

• Follow the same procedure to install fresh food

door panel.

• Re-install door handles with original screws.