Use & care guide

ZKT36 Trim Kit
3/4" Custom Panel_
Tools and materials
required:
• #2 Phillips screwdriver
• Stubby Phillips screwdriver
• Drill and appropriate bits
• Safety glasses
• Custompanels
These instructions are divided into 2 options:
Option 1--For non-dispenser and dispenser models
using custom collar trim.
Option 2--For dispenser model using the standard
full-width trim.
Kit
contents
Partslist:
FreezerDoor A
A. Toptrim
B. Sidetrim
C, Bottomtrim
c
FreshFoodDoor
D, Toptrim D
E. Sidetrim
F. Bottomtrim
G, Panelsupport E
brackets(4)
H, 44/8" screwsfor r
support brackets(20)
Grille supportpanel
and screws 6
ZKT36-6screws
J. Woodscrews#6 1/2"
fiat-headscrews
ZKT3630screws
H
J
This kit provides for the installation of 3/4" custom door
and grille panels, using the standard full length handle.
This kit contains all the necessary parts to apply 3/4"
panels on dispenser and non-dispenser models. Follow
the instructions for Option 1when applying custom
panels to a non-dispenser model or dispenser model
using custom collar trim. Follow instructions in Option 2
for a dispenser model using the standard full-width
dispenser trim.
Note: if youare using custom
handles,see ZKHT1Installation
Instructions.Fortubular
stainless steelhandles,see
ZKHTSS1Installation
Instructions.
/
27