Spec Sheet

Product Specification Revised 5/16
NOTES
A B C D E
38" 11 3/16" 68 5/8" 16 7/8" 20 7/8"
PANEL DIMENSIONS
FLUSH INSET 3/4" PANEL DIMENSIONS
Trimmed refrigerators are designed to
be customized with decorative panels.
Field-installed 1/2" or 3/4" custom door
and grille panels are required. For 3/4"
raised door and grille panels, routing is
required. The router depth is 1/4" all the
way around the panel’s backs. Additional
panel width reductions are required per
the diagrams shown. This will create
“picture frame” routing allowing the
panels to slide into the attached door
and grille trims.
Maximum total panel weight:
• Fresh food door panels – 75 lbs.
• Freezer drawer panel – 53 lbs.
• Grille panel – 18 lbs
Note: For panels constructed with rails and
stiles (5-panel), the rails must be a minimum
of 3" wide and stiles must be a minimum of
4" wide.
Door Handles
Door handle not included. A custom handle
supplied by your cabinet maker may be used.
ZKHPSS1: Professional tubular stainless steel
handle designed to fit 3/4" panels. Kit includes
one handle – 30 1/2" long.
ZKHSS2: European tubular stainless steel
handle designed to fit 3/4" panels. Kit includes
one handle – 64 1/4" long.
FLUSH INSET INSTALLATION
Grille Panel
Freezer
Panel
Dispenser
Cutout
Fresh
Food
Panel
A
B
C
F
G
D E
F G
17 23/32" 3 3/8"
DISPENSER CUTOUT
POSITION
Dispenser
Cutout
9 5/8"
(24.4)
15 3/8"
(39.1)
ZISB360DHMonogram
®
36" Built-In Side-by-Side Refrigerator
3/4" RAISED DOOR PANEL ROUTING
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
Front
NOTE: Routed areas should be
finished as they may be visible
when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
HINGE
SIDE
HANDLE
SIDE
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
3/4"
11/32"
1/4"
3/16"
1/4"
7/16"
DETAIL TOP
DETAIL BOTTOM
2 1/16"
3/16"
ROUTER DEPTH 1/4"
DETAIL HINGE
SIDE
DETAIL HANDLE
SIDE