Spec Sheet

Product Specification Revised 5/16
OVERALL DIMENSIONS
AFTER PANEL INSTALL
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
SPECIFICATIONS
Overall Width 38" (96.5 cm)
†
Overall Height 84 1/2" (214.6 cm)
†
Overall Depth 26" (66.0 cm)
†
Door Clearance 20 5/8" (52.4cm)
Cutout Width 39" (99.1 cm)
Cutout Height 85" (215.9cm)
Cutout Depth 26 3/16" (66.5 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 675 lb (306.2 kg)
FLUSH INSET INSTALLATION
† Dimensions include 3/4" custom cabinet panel
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply
is required. An individual properly grounded
branch circuit or circuit breaker is recommended.
Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.
38" (96.5)
84 1/2"
(214.6)
72 5/8"
(184.5)
68 5/8"
(174.3)
ZIS360DH
FRONT VIEW
11 11/16"
(29.7)
20 5/8" (52.4)
26" (66.0)
4"
(10.2)
SIDE VIEW
* 83 1/2"
(212.1)
15 3/8"
(39.1)
*39 17/32"
(100.4)
** These refrigerators are equipped with a 2-position door stop. The factory-set 115° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow
a 15" minimum clearance to wall for pan removal. If the 90° door stop position is used, pan
access is maintained, but pan removal is restricted.
35" (89.0)
Case width
**13"
(33.0)
**15"
(38.1)
** Allow 4" (10.2) min
clearance to a wall
for 90˚ door swing
20 5/8"
(52.4)
** Allow 4" (10.2) min
clearance to a wall
for 90˚ door swing
TOP VIEW
*115° Door swing
Doors can be adjusted to
90° door swing
Use leveling legs and wheels for maximum 1" height
adjustment from shipping height. Nominal installation height is 84".
Product Specification Revised 2/15
ZISB360DHMonogram
®
36" Built-In Side-by-Side Refrigerator