Specification Sheet

Product Specication Revised 1/22
For questions about your
appliance, please call 1-800-626-2000.
PAGE 9 OF 12
FLUSH INSET INSTALLATION
HELPFUL TIPS
E
FLUSH INSTALLATION
ZISB480DH
51" (129.5) Flush inset width
49 1/2" (125.7)
Width between cleats
7"
(17.8)
7"
(17.8)
3/4" (1.9)
Width of side cleats
5 3/8" (13.7)
1/2" (1.3)
26 3/16" (66.5)
Flush inset depth
20 13/16" (52.9)
Depth to cleat
FRONT VIEWSIDE VIEW
TOP VIEW
WATER
3 1/2"
(8.9)
W
Finished cleats
Finished
cleats
Case Trim
1/2" Panel
Case
Door
22 1/4"
(56.5)
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
85"
(215.9)
85"
(215.9)
6 3/4"
(17.1)
6 3/4"
(17.1)
FLUSH INSET INSTALLATION 1/2" PANELS
A
B
ANTI-TIP BRACKET
FRONT VIEW SIDE VIEW
W
24" (61.0)
1 1/2"
(3.8)
3 1/4"
(8.3)
7/16" (1.1)
Trim overlap
3 1/2"
(8.9)
E
WATER
47 1/2" (120.7)
20" (50.8)
*83 1/2" min
*84 1/2" max
(212.1-214.6)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
6"
(15.2)
5"
(12.7)
5"
(12.7)
5"
(12.7)
ZISB480DX
SIDE VIEW INSTALLED
UNDER SOFFIT
SOFFIT
SIDE VIEW INSTALLED
WITH WOODEN WALL STUDS
AND NO SOFFIT
*84"
(213.4)
*Or installation
height from floor
2" x 4"
Cut to 35" Length
Screws mounted
into vertical wall
studs
D
C
A
Mounting the junction box in
this location will also allow for
front accessibility through access
panel.
B
Water supply area.
WARNING:
The refrigerator is top heavy and
must be secured to prevent the
possibility of tipping forward.
Failure to do so may result in
death or serious injury.
The information below is for
cabinet design only. When
installing the anti-tip system you
must use the product installation
instructions.
Determine your installation
construction and required anti-tip
conguration:
C
Cut a 1" x 4" block 35" long.
Measure and mark under the
sot, 5 3/8" from the front
edge of the cabinet. Secure the
wood block under the sot.
From the bottom of the block
to the nished oor should
measure 84".
D
Wooden Wall Studs and No
Sot
• Cut a 2" x 4" block and secure
to brackets provided.
• Secure brackets to back wall
of opening at 84" or your
installation height from the
oor.
See Installation Instructions for
detailed instructions.
FLUSH INSET KIT ZKFN REQUIRED