Specification Sheet
Product Specication Revised 1/22
For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
PAGE 7 OF 12
SPECIFICATIONS
Overall Width 50" (127.0 cm)†
Overall Height 84 1/2" (214.6 cm) †
Overall Depth 26" (66.0 cm) †
Door Clearance 28 5/8" (72.1 cm)
Cutout Width 51" (129.5 cm)
Cutout Height 85" (215.9 cm)
Cutout Depth 26 3/16" (66.5 cm)
Plumbing Requirements 1/4" OD copper tubing or
GE SmartConnect kit
Shipping Weight 775 lb (351.5 kg)
† Dimensions include 3/4" custom cabinet panel
50" (127.0)
84 1/2"
(214.6)
72 5/16"
(183.7)
68 5/8"
(174.3)
ZIS480NH
FRONT VIEW
26" (66.0)
4"
(10.2)
SIDE VIEW
* 83 1/2"
(212.1)
** These refrigerators are equipped with a 3-position door stop. The factory-set 115° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted.
Allow a 15" minimum clearance to wall for pan removal. If the 90° door stop position is
used, pan access is maintained, but pan removal is restricted. A 130° door swing option
is available for standard installation only. Dimensions based on custom handle height
of 2 9/16” (6.5).
47" (119.4)
Case width
** Allow 4 9/16" (11.6)
min clearance to a wall
for 90˚ door swing
** Allow 4 9/16" (11.6)
min clearance to a wall
for 90˚ door swing
28 5/8"
(72.7)
TOP VIEW
Use leveling legs and wheels for maximum 1" height
adjustment from shipping height. Nominal installation height is 84".
Allow
**
15" (38.1)
min clearance
for 130˚ door swing
Allow
**
20" (50.8)
min clearance
for 130˚ door swing
*115° Door swing
Doors can be adjusted to
90° door swing
20 5/8" (52.4)
20 5/8"
(52.4)
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply is required. An
individual properly grounded branch circuit or circuit breaker
is recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.
OVERALL DIMENSIONS
AFTER PANEL INSTALL
FLUSH INSET
INSTALLATION