Specification Sheet
Product Specication Revised 1/22
For questions about your
appliance, please call 1-800-626-2000.
PAGE 10 OF 12
FLUSH INSET INSTALLATION
HELPFUL TIPS
A B C D E
50" 11 3/16" 68 5/8" 20 7/8" 28 7/8"
PANEL DIMENSIONS
FLUSH INSET 3/4" PANEL DIMENSIONS
Grille Panel
Freezer
Panel
Fresh
Food
Panel
A
B
C
D E
3/4" RAISED DOOR PANEL ROUTING
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
Front
NOTE: Routed areas should
be finished as they may be
visible when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
HINGE
SIDE
HANDLE
SIDE
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
3/4"
11/32"
1/4"
3/32"
1/4"
11/32"
DETAIL TOP
DETAIL BOTTOM
2 1/16"
3/16"
ROUTER DEPTH 1/4"
DETAIL HINGE
SIDE
DETAIL HANDLE
SIDE
Trimmed refrigerators are designed
to be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door and grille panels are
required. For 3/4" raised door and
grille panels, routing is required.
The router depth is 1/4" all the way
around the panel’s backs. Additional
panel width reductions are required
per the diagrams shown. This will
create “picture frame” routing
allowing the panels to slide into the
attached door and grille trims.
MAXIMUM TOTAL PANEL
WEIGHT:
• Fresh food door panels – 75 lbs.
• Freezer drawer panel – 53 lbs.
• Grille panel – 18 lbs.
DOOR HANDLES
Door handle not included. A
custom handle supplied by your
cabinet maker may be used.
WARNING:
Door Trim Pinch Point
Hazard Improper installation
can lead to a nger pinch point
hazard between the side door trim
and the cabinets when operating
the door, especially with children.
To minimize this risk you must
follow the installation instructions
for cabinet dimensions, trim
assembly and door stop angle.