Spec Sheet

For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
Product Specication Created 10/19PAGE 7 OF 12
OVERALL DIMENSIONS
AFTER PANEL INSTALL
FLUSH INSET
INSTALLATION
SPECIFICATIONS
Overall Width
Overall Height
Overall Depth
Door Clearance
Cutout Width
Cutout Height
Cutout Depth
Plumbing Requirements
Shipping Weight
38" (96.5 cm)
84 1/2" (214.6 cm)
25 7/8" (65.9 cm)
19 1/2" (49.5 cm)
39" (99.1 cm)
85" (215.9 cm)
26 3/16" (66.5 cm)
1/4" OD copper tubing or
GE SmartConnect kit
670 lb (304 kg)
38" (96.5)
10 13/16"
(27.5)
25 7/8" (65.7)
*84 1/2"
(214.6)
*73 1/4"
(186.1)
*4"
(10.2)
SIDE VIEWFRONT VIEW
*83 1/2"
(212.1)
35" (88.9)
Case width
ZIP360NH
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
19 1/2"
(49.5)
TOP VIEW
*26 3/8"
(70.0)
7/16"
(1.1)
Allow
4 9/16" (11.6) min
clearance to a wall for
90º door swing
Allow 4 9/16" (11.6) min
clearance to a wall for
90º door swing
** Dimensions based on custom handle height of 2 9/16" (6.5).
20 5/8" (52.4)
**8"
(20.3)
**8"
(20.3)
*115° Door swing
Doors can be adjusted to
90° door swing
20 5/8"
(52.5)
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply is required. An
individual properly grounded branch circuit or circuit breaker
is recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.