Spec Sheet

For questions about your
appliance, please call 1-800-626-2000.
Product Specication Created 10/19PAGE 10 OF 12
FLUSH INSET INSTALLATION
HELPFUL TIPS
3/4" RAISED GRILLE PANEL ROUTING
3/4" RAISED FREEZER DRAWER PANEL ROUTING
Trimmed refrigerators are designed
to be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door, drawer and grille
panels are required. For 3/4" raised
panels, routing is required. e
router depth is 1/4" all the way
around the panel’s backs. Additional
panel width reductions are required
per the diagrams shown. is will
create “picture frame’ routing
allowing the panels to slide into the
attached door, drawer and grille
trims.
MAXIMUM TOTAL PANEL
WEIGHT:
• Fresh food door panels – 30 lbs.
• Freezer drawer panel – 28 lbs.
• Grille panel – 11 lbs
NOTE: For panels constructed with
rails and stiles (5-panel), the rails
must be a minimum of 3” wide and
stiles must be a minimum of 4” wide.
DOOR HANDLES
Door handles not included. Custom
handles supplied by your cabinet
maker may be used.
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
Front
NOTE: Routed areas should
be finished as they may be
visible when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
Front
NOTE: Routed areas should
be finished as they may be
visible when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
3/4"
11/32"
1/4"
1/4"
1/4"
1/2"
DETAIL TOP
DETAIL BOTTOM
1/4"
DETAIL TOP
DETAIL BOTTOM
ROUTER DEPTH 1/4"
1 11/16"
2 1/16" 2 1/16"
ROUTER DEPTH 1/4"
ROUTER DEPTH 1/4"
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE
2 1/16" 2 1/16"
ROUTER DEPTH 1/4"
ROUTER DEPTH 1/4"
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE