Installation Instructions

9
3/4” (1.91 cm) OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may be installed on trimmed
models. The overlay panel must be secured to a 1/4” (0.64 cm) thick backer
panel which slides into the trim. A spacer panel 0.10” (0.25 cm) thick must
be placed between the overlay and backer panel.
Assemble the panels with glue and screws.
• Center the spacer panel on the backer panel, left to right and top to
bottom. Secure the panels with glue.
• Refer to the following chart for locating the backer panel to the overlay
panel. Secure the overlay panel to the backer panel with glue and screws.
Screws must be countersunk into the backer panel.
Spacer Panel
Backer Panel
Overlay Panel
NOTE: Left-to-right offset is not always equal
to top-to-bottom offset.
IMPORTANT NOTE: Maximum
total weight for the assembled
panels:
• Fresh food door panels – 30 lbs.
(14 kg)
• Freezer drawer panel – 28 lbs.
(13 kg)
• Grille Panel – 11 lbs. (5 kg)
Design Guide - Standard Installation
Panel Locations
.25" + .10" + .75" = 1.10" Total Panel Thickness
(0.64 + 0.25 + 1.9 = 2.79 cm)
Fresh Food Freezer Grille
1/4” (0.63 cm)
Backer Panel
46-1/16” x 16-1/2”
(116.99 x 14.91 cm)
33-7/8” x 21-7/8”
(86.04 x 55.56 cm)
33-7/8” x 8-7/8”
(86.04 x 22.54 cm)
0.10” (0.25 cm)
Spacer Panel
44-11/16” x 15”
(113.51 x 38.10 cm)
32-1/2” x 20-1/2”
(82.55 x 52.07 cm)
32-1/2” x 7-5/8”
(82.55 x 19.37 cm)
3/4” (1.9 cm)
Overlay Panel
46-5/16” x 16-5/8”
(117.63 x 42.23 cm)
34-1/8” x 22"
(96.67 x 55.88 cm)
34-1/8” x 9”
(96.67 x 22.86 cm)
ABCD
Door Panels 1/8”
(0.32 cm)
0 1/8”
(0.32 cm)
1/8”
(0.32 cm)
Drawer Panel 1/8”
(0.32 cm)
1/8”
(0.32 cm)
1/16”
(0.16 cm)
1/16”
(0.16 cm)
Grille Panel 1/8”
(0.32 cm)
1/8”
(0.32 cm)
1/16”
(0.16 cm)
1/16”
(0.16 cm)
Panel Dimensions
Hinge
Side
Hinge
Side
Handle
Side
Fresh
Food
Back
Backer with
Overlay Panel
Assembly
A
B
C
D
Fresh
Food
Back
A
B
C
D
C
D
A B
Grille Back
C
D
A B
Freezer Back
31-1000451 Rev. 0