Specifications

NOTES
ZIFS240HSSMONOGRAM FRESH-FOOD REFRIGERATOR
Product Specification Revised 1/18
ELECTRIC
34 1/2"
(87.6) min
underside of
counter to floor
35" (88.9) max
24" (61.0)
min cutout depth
CUTOUT INSTALLATION
SIDE VIEW
INSTALLATION CUTOUT
FRONT VIEW
23 3/4" (60.3)
min standard
24" (61.0)
min flush inset
10 1/2" (26.7)
1 1/2" (3.8)
9"
(22.9) max
ZIFS240PSS
STANDARD INSTALLATION
Installation Space: This
module can be installed
beneath a countertop
or can be used free-
standing.
For a standard
installation of stainless
steel unit: The product
must be installed so
that the front face will
project 2-5/8" forward
of adjacent cabinets.
For a flush installation
of stainless steel unit:
Install a 1" wide filler
strip on the hinge
side. The width of
the opening must be
24" min. wide. See
installation instructions
for details.
Location Requirements:
All Monogram
Refrigeration Modules
may be closed in on
the top and sides as
long as the front is
unobstructed for air
circulation and door
swing.
• Do not install these
products where the
temperatures will go
below 55° F (13 C) or
above 90° F (32 C).
• Products must operate
from separate properly
grounded receptacles.
• These products are
not designed to be
stacked one over the
other.
See installation
instructions for side-by-
side information.
PRODUCT DIM. A
ZDWI240, ZDB1240 1"
ZDWR240, ZDBR240 1"
ZIB1240, ZIF1240 1"
ZIFS240, ZIBS240 1/4"
ZDOD240 1-1/4"
PRODUCT DIM. A
ZDWI240, ZDB1240 2"
ZDWR240, ZDBR240 1-3/4"
ZIFS240, ZIF1240 1-5/8"
ZDOD240 1-7/8"
ZIB1240, ZIBS240 2-5/8"
CABINET CABINET
Dim. A
Front Edge of
Product Case
Front Face
Standard
Installation
110º
120º
In a standard installation, the
product will project forward of
adjacent cabinets. See Dim. A.
23 3/4" min.
CABINET CABINET
These products will fit flush to adjacent
cabinets when installed with a Dim. A - width
filler panel or cleat. The filler panel should be
recessed or set back behind the door and
even with the front edge of the product case.
110º
120º
Flush
Installation
Filler panel or cleat to be set
back even with front of case.
Front Edge of
Product Case
Dim. A
Front Face
24" min. width
stainless steel models
REFRIGERATION MODULES, TOP VIEW