Specifications

NOTES
Product Specification Revised 7/16
ZIFI240HIIMONOGRAM FRESH-FOOD REFRIGERATOR
INSTALLATION
A" (aa)
B"
(bb)
Door
1/4" Backer Panel
.10" Spacer Panel
Trim
3/4" Overlay Panel
10 1/2" (26.7)
1 1/2" (3.8)
23 3/4" (60.3) Min
cutout width
9" (22.9)
Max
34 1/2"
(87.7)
Min
underside of
counter to floor
35" (89) Max
24"
(60.1)
min cutout depth
FLUSH CUTOUT INSTALLATION
SIDE VIEW
INSTALLATION CUTOUT
FRONT VIEW
ELECTRIC
ZIFI240PII
A" (aa)
B"
(bb)
Door
1/4" Backer Panel
.10" Spacer Panel
Trim
3/4" Overlay Panel
10 1/2" (26.7)
1 1/2" (3.8)
23 3/4" (60.3) Min
cutout width
9" (22.9)
Max
34 1/2"
(87.7)
Min
underside of
counter to floor
35" (89) Max
24"
(60.1)
min cutout depth
FLUSH CUTOUT INSTALLATION
SIDE VIEW
INSTALLATION CUTOUT
FRONT VIEW
ELECTRIC
ZIFI240PII
Note: If installing
between frameless
cabinets, a 1/2" wide
filler strip or side panel
may be required. The
filler strip will act as a
spacer between the
door case and adjacent
cabinet and will prevent
interference with
cabinet door swing.
The width of the
opening must include
filler panels.
Note: This product can
be installed as a built-in
or used free-standing.
The top canopy can be
removed for installation
below a countertop.
The cutout depth must
be 24".
The cutout dimensions
shown allows for a full
door swing and access
to the pull-out racks
when installed as a
built-in.
• The outdoor/indoor
refrigerator can be
used freestanding.
• Stainless steel top
canopy can be
removed for built-in
installation.
• Vented stainless steel
toekick.
Note: Max assembled drawer panel wight is 25 lbs.
3/4" OVERLAY PANEL DIMENSIONS
(IN INCHES)
A (WIDTH) B (HEIGHT)
1/4" Backer 23 3/16" 29 9/16"
.10" Spacer 22 1/2" 29 1/16"
3/4" Overlay 23 5/8" 30"