Spec Sheet

For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
OVERALL DIMENSIONS
Product Specication Created 10/19PAGE 3 OF 17
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply is required.
An individual properly grounded branch circuit or circuit
breaker is recommended. Install a properly grounded
3-prong electrical receptacle recessed into the back wall.
SPECIFICATIONS
Overall Width 36" (91.4 cm)
Overall Height 84" (213.4 cm)
Overall Depth 25 1/8" (63.8 cm)
Door Clearance 36 1/2" (92.7 cm)
Cutout Width 35 1/2" (90.2 cm)
Cutout Height 83 1/2" - 84 1/2"
(212.1 - 214.6 cm)
Cutout Depth 24" (61 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 569 lb (258 kg)
36" (91.4)
25 1/8" (63.8)
23 5/8" (60.0)
*84"
(213.4)
*73 7/16"
(186.5)
*3 1/4"
(8.3)
*83 1/2"
(212.1)
36 1/2"
(92.7)
TOP VIEW
35" (88.9)
Case width
70 7/16"
(178.9)
*3"
(7.6)
ZIF360NXLH
SIDE VIEWFRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
**
4 9/16" (11.6) min
clearance to a wall
for 90˚ door swing
** These refrigerators are equipped with a 3 position door stop. The factory
set 115˚ door swing can be adjusted to 90˚ if clearances to adjacent cabinets
or walls is restricted. Allow full 130˚ door swings for pan removal. If the 90˚ door
stop position is used, pan access is maintained, but pan removal is restricted.
** Dimensions are based on custom handle height of 2 9/16"
(6.5).
** Allow 25" (63.5) min
clearance for 130˚
door swing
STANDARD INSTALLATION