Spec Sheet
For questions about your
appliance, please call 1-800-626-2000.
Product Specication Created 10/19PAGE 15 OF 17
ZIF360NHLH_ZIR360NHRH
75" (190.5)
Finished Width
26 3/16" (66.5)
Min. Cutout Depth
24 3/16" (61.4)
4 5/16"
(10.9)
5 1/2"
(13.9)
9"
(22.9)
85"
(215.9)
Finished
Opening
3 1/2"
(8.9)
W
FRONT VIEW
ELEC.
5 1/2"
(13.9)
9"
(22.9)
3 1/2"
(8.9)
15" (38.1) min
To wall
15" (38.1) min
To wall
1 1/2"
(3.8)
115˚
Door swing
115˚
Door swing
75 1/2"
(191.8 )
From floor
to bottom
of electrical
area
ELEC.
SIDE VIEW
7"
(17.8)
7"
(17.8)
WATER
3 1/2"
(9.0)
WATER
3 1/2"
(9.0)
7 1/2"
(19.1)
7 1/2"
(19.1)
DUAL INSTALLATIONS
Trimmed freezers are designed to
be customized with decorative panels.
Field-installed 1/2" or 3/4" custom door,
drawer and grille panels are required.
For 3/4" raised panels, routing is
required. e router depth is 1/4" all
the way around the panel’s backs.
Additional panel width reductions are
required per the diagrams shown. is
will create “picture frame’ routing
allowing the panels to slide into the
attached door, drawer and grille trims.
Maximum total panel weight:
• Fresh food door panels – 67 lbs.
• Grille panel – 25 lbs
Door Handles:
Custom handles are required for
flush installation.
Order a ZKBFN720NII unification
kit for an integrated appearance on
2 custom panel models installed
side-by-side.
e 1/2" overlay panel must be secured
to a .10" spacer panel and a 1/4" thick
backer panel, which slides into the trim.
Assemble the panels with glue
and screws:
• Center the spacer panel on the backer
panel, left to right and top to bottom.
Secure the panels with glue.
• Refer to the single unit flush
installation diagram on pg 7
for backer to 1/2" overlay
panel placement.
A
A Separate 115V, 60Hz,
15 or 20 amp power supply is
recommended for each product.
Grille Panel
Door
Panel
D
A
Door
Panel
B
C
D
PANEL DIMENSIONS
FLUSH INSET 1/2" PANEL DIMENSIONS DUAL INSTALLATION
FLUSH INSET
INSTALLATION
HELPFUL TIPS
A
A B C D
1/4" Backer Panel 69 7/8" 8 7/8" 69 5/16" 33 7/8"
.10" Spacer Panel 68 1/2" 7 5/8" 67 15/16" 32 1/2"
1/2" Overlay Panel 74" 10 7/16" 69 3/4" 36 7/8"