Specification Sheet

For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
OVERALL DIMENSIONS
Product Specication Created 10/19PAGE 9 OF 17
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply is required.
An individual properly grounded branch circuit or circuit
breaker is recommended. Install a properly grounded
3-prong electrical receptacle recessed into the back wall.
SPECIFICATIONS
Overall Width 38" (96.5 cm)†
Overall Height 84 11/16" (215.1 cm)†
Overall Depth 26 1/8" (66.4 cm)†
Door Clearance 38 3/4" (98.4 cm)
Cutout Width 39" (99.1 cm)
Cutout Height 85" (215.9 cm)
Cutout Depth 26 3/16" (66.5 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 569 lb (258 kg)
† Dimensions include 3/4" custom cabinet panel
38" (96.5)
*84 11/16"
(215.1)
*73 3/4"
(187.3)
69 3/4"
(177.2)
ZIF360NHLH
FRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum 1" height
adjustment from shipping height. Nominal installation height is 84 11/16".
10 15/16"
(27.8)
20 5/8" (52.5)
26 1/8" (66.4)
*4"
(10.2)
SIDE VIEW
* 84"
(213.4)
35" (88.9)
Case width
38 3/4"
(98.4)
TOP VIEW
**
4 9/16" (11.6) min
clearance to a wall
for 90˚ door swing
** Dimensions based on custom handle height of 2 9/16" (6.5).
** Allow 15" (38.1) min
clearance for 115˚
door swing
20 5/8"
(52.5)
FLUSH INSET INSTALLATION