Specification Sheet
For questions about your
appliance, please call 1-800-626-2000.
Product Specication Created 10/19PAGE 5 OF 17
STANDARD INSTALLATION
STANDARD 3/4" OVERLAY PANEL DIMENSIONS SINGLE INSTALLATION
STANDARD 1/4" FRAMED PANEL DIMENSIONS SINGLE INSTALLATION
Grille Panel
Door
Panel
A
B
C
Grille Panel
Door
Panel
A
B
C
Door
1/4" Framed Panel
Optional ZKLN
kit handle
Trim
Door
1/4" Backer Panel
.10" Spacer Panel
Optional ZKLN
kit handle
Trim
3/4" Overlay Panel
Trimmed freezers are designed to be
customized with decorative panels.
Field-installed custom door and grille
panels are required.
1/4" Framed Panels: For 1/4" thick
custom panels ordered from your
cabinet maker. e decorative panels
slide into the trim.
Maximum total panel weight:
• Door panel – 67 lbs.
• Grille panel – 11 lbs.
3/4" Overlay Panels: For 3/4" thick
custom panels ordered from your
cabinet maker. e decorative panels
slide into the trim. e overlay panel
must be secured to a 1/4"-thick backer
panel which slides into the trim.
A spacer panel 0.10" thick must be
placed between the overlay and
backer panels.
Center each panel over the other.
Assemble the panels with glue and
screws. Screws must be countersunk
into the backer panel.
NOTE: Left-to-right offset is not
always equal to top-to-bottom offset.
Maximum total panel weight:
• Door panel – 67 lbs.
• Grille panel – 11 lbs.
Door Handles:
Door handles are not provided.
Custom handles supplied by your
cabinet maker may be used. An
optional visor handle can be
ordered as kit ZKLN.
A B C
1/4" Framed Panel 33 7/8" 8 7/8" 69 5/16"
A B C
1/4" Backer Panel 33 7/8" 8 7/8" 69 5/16"
.10" Spacer Panel 32 1/2" 7 5/8" 67 15/16"
3/4" Overlay Panel 34 1/8" 9" 69 9/16"
HELPFUL TIPS