Specification Sheet

For questions about your
appliance, please call 1-800-626-2000.
Product Specication Created 10/19PAGE 16 OF 17
Grille Panel
Door
Panel
D
A
Door
Panel
B
C
D
FLUSH INSET 3/4" PANEL DIMENSIONS DUAL INSTALLATION
Trimmed freezers are designed to
be customized with decorative panels.
Field-installed 1/2" or 3/4" custom
door, drawer and grille panels are
required. For 3/4" raised panels, routing
is required. e router depth is 1/4" all
the way around the panel’s backs.
Additional panel width reductions are
required per the diagrams shown. is
will create “picture frame’ routing
allowing the panels to slide into the
attached door, drawer and grille trims.
Maximum total panel weight:
• Fresh food door panels – 67 lbs.
• Grille panel – 25 lbs.
Door Handles:
Custom handles are required for flush
installation.
Order a ZKBFN720NII unification
kit for an integrated appearance on
2 custom panel models installed
side-by-side.
3/4" RAISED DOOR PANEL ROUTING
(SEE PAGE 10 FOR 3/4" GRILLE PANEL ROUTING DIAGRAMS)
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
Front
NOTE: Routed areas should
be finished as they may be
visible when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
HINGE
SIDE
HANDLE
SIDE
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
3/4"
11/32"
1/4"
3/16"
1/4"
7/16"
DETAIL TOP
DETAIL BOTTOM
2 1/16"
3/16"
ROUTER DEPTH 1/4"
DETAIL HINGE
SIDE
DETAIL HANDLE
SIDE
FLUSH INSET
INSTALLATION
HELPFUL TIPS
PANEL DIMENSIONS
A B C D
74" 10 7/16" 69 3/4" 36 7/8"