Specification Sheet

For questions about your
appliance, please call 1-800-626-2000.
Product Specication Created 10/19PAGE 12 OF 17
3/4" RAISED DOOR PANEL ROUTING
Trimmed freezers are designed to be
customized with decorative panels.
Field-installed 1/2" or 3/4" custom door
and grille panels are required. For 3/4"
raised panels, routing is required. e
router depth is 1/4" all the way around
the panel’s backs. Additional panel width
reductions are required per the diagrams
shown. is will create “picture frame’
routing allowing the panels to slide into
the attached door and grille trims.
Maximum total panel weight:
• Door panel – 67 lbs.
• Grille panel – 11 lbs
Note: For panels constructed with rails
and stiles (5-panel), the rails must be a
minimum of 3" wide and stiles must be
a minimum of 4" wide.
Door Handles
Custom handles are required for
flush installation.
Order a ZKBFN720NII unification
kit for an integrated appearance
on 2 custom panel models installed
side-by-side.
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
3/4"
11/32"
1/4"
1/4"
1/4"
7/16"
DETAIL TOP
DETAIL BOTTOM
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE
2-1/16"
2-1/16"
ROUTER DEPTH 1/4" ROUTER DEPTH 1/4"
1/4"
3/32"
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
Front
NOTE: Routed areas should
be finished as they may be
visible when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
FLUSH INSET
INSTALLATION
HELPFUL TIPS