Specification Sheet

For questions about your
appliance, please call 1-800-626-2000.
Product Specication Created 10/19PAGE 11 OF 17
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
DETAIL TOP
DETAIL BOTTOM
1/8"
1-7/16"
ROUTER DEPTH 1/4"
Grille Panel
Door
Panel
A
B
C
PANEL DIMENSIONS
FLUSH INSET 3/4" PANEL DIMENSIONS SINGLE INSTALLATION
Trimmed freezers are designed to be
customized with decorative panels.
Field-installed 1/2" or 3/4" custom
door and grille panels are required. For
3/4" raised panels, routing is required.
e router depth is 1/4" all the way
around the panel’s backs. Additional
panel width reductions are required per
the diagrams shown. is will create
“picture frame’ routing allowing the
panels to slide into the attached door
and grille trims.
Maximum total panel weight:
• Door panel – 67 lbs.
• Grille panel – 11 lbs
Note: For panels constructed with rails
and stiles (5-panel), the rails must be a
minimum of 3" wide and stiles must
be a minimum of 4" wide.
Door Handles
Custom handles are required for flush
installation.
Order a ZKBFN720NII unification
kit for an integrated appearance
on 2 custom panel models installed
side-by-side.
3/4" GRILLE DOOR PANEL ROUTING
Front
NOTE: Routed areas should
be finished as they may be
visible when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE
2-1/16"
2-1/16"
ROUTER DEPTH 1/4" ROUTER DEPTH 1/4"
1/4"
3/32"
FLUSH INSET
INSTALLATION
HELPFUL TIPS
A B C
38" 10 7/16" 69 3/4"