Specifications

ZIF360NHLHMONOGRAM 36" BUILT-IN ALL-FREEZER
Product Specification Revised 1/18
ZIF360NHLH_ZIR360NHRH
75" (190.5)
Finished Width
26 3/16" (66.5)
Min. Cutout Depth
24 3/16" (61.4)
4 5/16"
(10.9)
5 1/2"
(13.9)
9"
(22.9)
85"
(215.9)
Finished
Opening
3 1/2"
(8.9)
W
FRONT VIEW
ELEC.
5 1/2"
(13.9)
9"
(22.9)
3 1/2"
(8.9)
15" (38.1) min
To wall
15" (38.1) min
To wall
1 1/2"
(3.8)
115˚
Door swing
115˚
Door swing
75 1/2"
(191.8 )
From floor
to bottom
of electrical
area
ELEC.
SIDE VIEW
7"
(17.8)
7"
(17.8)
WATER
3 1/2"
(9.0)
WATER
3 1/2"
(9.0)
7 1/2"
(19.1)
7 1/2"
(19.1)
DUAL INSTALLATIONS
A
Trimmed freezers are designed to
be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door, drawer and grille
panels are required.
For 3/4" raised panels, routing is
required. The router depth is 1/4" all
the way around the panel’s backs.
Additional panel width reductions
are required per the diagrams
shown. This will create “picture
frame’ routing allowing the panels to
slide into the attached door, drawer
and grille trims.
Maximum total panel weight:
• Fresh food door panels – 67 lbs.
• Grille panel – 25 lbs
Door Handles:
Custom handles are required for
flush installation.
ZKHPSS1: Professional tubular
stainless steel handle designed to
fit custom panels. Kit includes one
handle – 30 1/2" long. Order 2 kits
from your Monogram supplier.
ZKHSS2: European tubular stainless
steel handle designed to fit 3/4"
panels. Kit includes one handle –
64 1/4" long.
Order ZUG2: Unified grille kit for one
continuous panel in dual installation.
Maximum total door panel weight -
25 lbs.
The 1/2" overlay panel must be
secured to a .10" spacer panel and a
1/4" thick backer panel, which slides
into the trim.
Assemble the panels with glue and
screws:
• Center the spacer panel on the
backer panel, left to right and top
to bottom. Secure the panels with
glue.
• Refer to the single unit ush
installation diagram on pg 7
for backer to 1/2" overlay panel
placement.
A
A Separate 115V, 60Hz,
15 or 20 amp power supply is
recommended for each product.
Grille Panel
Door
Panel
D
A
Door
Panel
B
C
D
PANEL DIMENSIONS
A B C D
1/4" Backer Panel 69 7/8" 8 7/8" 69 5/16" 33 7/8"
.10" Space Panel 68 1/2" 7 5/8" 67 15/16" 32 1/2"
1/2" Overlay Panel 74" 10 7/16" 69 3/4" 36 7/8"
FLUSH INSET 1/2" PANEL DIMENSIONS DUAL INSTALLATION
NOTES
FLUSH INSET
INSTALLATION