Specifications

ZIF360NHLHMONOGRAM 36" BUILT-IN ALL-FREEZER
Product Specification Revised 1/18
Grille Panel
Door
Panel
A
B
C
C
D
A
B
Hinge Side
Backer with
Overlay Panel
Assembly
Door Panel Back
A B C
1/4" Backer Panel 33 7/8" 8 7/8" 69 5/16"
.10" Space Panel 32 1/2" 7 5/8" 67 15/16"
1/2" Overlay Panel 38" 10 7/16" 69 3/4"
PANEL DIMENSIONS
A B C D
Door Panel 2 1/16" 2 1/16" 3/16" 1/4"
Grille Panel 2 1/16" 2 1/16" 1 7/16" 1/8"
PANEL DIMENSIONS
FLUSH INSET 1/2" PANEL DIMENSIONS SINGLE INSTALLATION
1/2" OUTER PANEL TO BACKER PLACEMENT
C
D
A B
Grille Back
1/2"
Overlay
Panel
1/4"
Backer
Panel
Door
.10"
Spacer
The 1/2" overlay panel must be
secured to a .10" spacer panel and
a 1/4" thick backer panel, which
slides into the trim.
Assemble the panels with glue and
screws:
• Center the spacer panel on the
backer panel, left to right and
top to bottom. Secure the panels
with glue.
• Refer to the chart for locating
the backer panel to the overlay
panel. Secure the overlay panel
to the backer panel with glue
and screws. Screws must be
countersunk into the backer
panel
Order ZUG2: Unified grille kit for
dual installation. Maximum total
panel weight – 25 lbs.
Note: For panels constructed with
rails and stiles (5-panel), the rails
must be a minimum of 3" wide
and stiles must be a minimum of
4" wide.
NOTES
FLUSH INSET
INSTALLATION