MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH SECTION 1 STANDARD INSTALLATION 1/4" FRAMED PANELS 3/4" OVERLAY PANELS SECTION 2 FLUSH INSET INSTALLATION Product Specification Revised 1/18
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH OVERALL DIMENSIONS STANDARD INSTALLATION 25 1/8" (63.8) 23 7/8" (60.7) 36" (91.5) 1 7/8" (4.8) *84" *83 1/2" (212.1) (213.4) 1/4" 69 5/8" *73 (186.1) (176.8) SPECIFICATIONS Overall Width 36" (91.4 cm) Overall Height 84" (213.4 cm) Overall Depth 25 3/8" (64.45 cm) Door Clearance 36 3/4" (93.4 cm) Cutout Width 35 1/2" (90.2 cm) Cutout Height 83 1/2" - 84 1/2" (212.1 - 214.
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH STANDARD INSTALLATION STANDARD INSTALLATION 3 1/8" (7.9) 3 1/8" 35 1/2" (90.2) 35 1/2" (90.2) 2 5/16" (5.9)2 5/16" (7.9) A (5.9) 25 3/8" (64.5) 25 3/8" (64.5) 1 1/2" (3.8) 1 1/2" (3.8) 7/16" (1.1) Trim 7/16" overlap (1.1) Trim overlap 5 1/2" ELEC. (14.0)5 1/2" ELEC. (14.0) 9" (22.9) *83 1/2" min *83 1/2" *84 1/2" max min *84 1/2" max (212.1-214.6) 9" (22.9) The freezer is top heavy and must be secured to prevent the possibility of tipping forward.
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH STANDARD 1/4" FRAMED PANEL DIMENSIONS SINGLE INSTALLATION NOTES A Grille Panel B Trim Trimmed refrigerators are designed to be customized with decorative panels. Field-installed custom door and grille panels are required. Door 1/4" Framed Panel Door Panel Supplied Handles C A 33 7/8" B C 8 7/8" 69 5/16" STANDARD 3/4" OVERLAY PANEL DIMENSIONS SINGLE INSTALLATION A B 1/4" Framed Panels: For 1/4" thick custom panels ordered from your cabinet maker.
MONOGRAM 36" BUILT-IN ALL-FREEZER CUSTOM SIDE PANELS F 24" (61.0) ZIF360NHLH STANDARD INSTALLATION NOTES 3/16" (.5) 1 7/8" (4.8) *84" (213.4) *Depending on installation height F S ide panels must be used whenever the sides of the freezer will be exposed. A 1/4" side panel will slip into the side case trim. Secure the panels to the freezer with stick-on hook and loop fastener strips. Order the side panels from the cabinet manufacturer. *3"- 4" (7.6 - 10.
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH DUAL INSTALLATIONS STANDARD INSTALLATION A 71 1/2" (181.7) Finished Width 4 5/16" 24 3/16" (61.4) (11.0) ELEC. 5 1/2" ELEC. (13.9) 9" NOTES 26 3/16" (66.5) Min. Cutout Depth A A separate 115V, 60Hz, 15- or 20-amp power supply is recommended for each product. Additional cutout width may be required when side panels are used. 5 1/2" (13.9) 9" (22.9) (22.9) 83 1/2" min 84 1/2" max (212.1-214.
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH STANDARD 3/4" OVERLAY PANEL DIMENSIONS DUAL INSTALLATION PANEL DIMENSIONS A B Grille Panel A 69 7/8" 68 1/2" 70 1/8" 8 7/8" 7 5/8" 9" B 71 1/2" (181.6) 69 5/16" 67 15/16" 69 9/16" 24" (61.0) D 33 7/8" Finished Width Door Panel 9" 3/4" Overlay Panel C 24 3/16" (61.4) (5.9) ELEC. .10" Spacer Panel D D 2 5/16" 1/4" Backer Panel 5 1/2" 5 1/2" ELEC. (13.9) (13.9) Door Panel 9" (22.9) Min. Cutout Depth 32 1/2" 34 1/8" .25" + .
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH OVERALL DIMENSIONS FLUSH INSET INSTALLATION 26 1/8" (66.3) 20 5/8" (52.4) 38" (96.5) 10 15/16" (27.8) *84 11/16" (215.1) * 84" (213.4) *73 3/4" (187.3) 69 3/4" (177.2) SPECIFICATIONS Overall Width 38" (96.5 cm)† Overall Height 84 11/16" (215.1 cm)† Overall Depth 26 1/8" (66.3 cm)† Door Clearance 38 3/4" (98.4 cm) Cutout Width 39" (99.1 cm) Cutout Height 85" (215.9 cm) Cutout Depth 26 3/16" (66.
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH FLUSH INSET INSTALLATION 3/4" PANELS FLUSH INSET INSTALLATION TOP VIEW Case 5 1/4" (13.3) 2 5/16" (5.9) Case Trim 3" 35 1/2" (90.2) 24" (61.0) Door 1 1/2" (7.6) 3/4" Panel 26 3/16" (66.5) Flush inset depth 6" ELEC. 20 15/16" (53.2) (15.2) 3/4" (1.9) Depth to cleat 10" Width of side cleats (25.4) C *83 1/2" min *84 1/2" max (212.1-214.6) *Trim will overlap additional 7/16" NOTES Finished cleats 7/16" (1.1) Trim overlap 1/2" (1.3) (3.
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH FLUSH INSET INSTALLATION FLUSH INSET 3/4" PANEL DIMENSIONS SINGLE INSTALLATION A NOTES PANEL DIMENSIONS Grille Panel A B 38" Door Panel B Trimmed freezers are designed to be customized with decorative panels. Field-installed 1/2" or 3/4" custom door and grille panels are required. For 3/4" raised panels, routing is required. The router depth is 1/4" all the way around the panel’s backs.
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH FLUSH INSET INSTALLATION 3/4" RAISED DOOR PANEL ROUTING NOTES NOTE: Routed areas should be finished as they may be visible when assembled. DETAIL TOP 3/4" TOP 11/32" 1/4" Front 1/4" 7/16" Back Back Front CORNER VIEW SHOWING “PICTURE FRAME” ROUTING 1/4" Trimmed freezers are designed to be customized with decorative panels. Field-installed 1/2" or 3/4" custom door and grille panels are required. For 3/4" raised panels, routing is required.
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH FLUSH INSET INSTALLATION 1/2" PANELS FLUSH INSET INSTALLATION TOP VIEW NOTES NOTES Case 5 3/8" (13.7) 3" 35 1/2" (90.2) 2 5/16" Finished cleats Case Trim 24" (61.0) Door 1 1/2" (7.6) (5.9) 26 3/16" (66.5) 6" Flush inset depth ELEC. 20 13/16" (52.9) (15.2) 3/4" (1.9) Depth10" to cleat Width of side cleats (25.4) C *83 1/2" min *84 1/2" max 7/16" (1.1) Trim overlap 1/2" (1.3) (3.8) 1/2" Panel 39" (99.1) Flush inset width 37 1/2" (95.
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH FLUSH INSET 1/2" PANEL DIMENSIONS SINGLE INSTALLATION A PANEL DIMENSIONS B Grille Panel Door Panel NOTES A B 1/4" Backer Panel 33 7/8" .10" Space Panel 32 1/2" 1/2" Overlay Panel 38" FLUSH INSET INSTALLATION The 1/2" overlay panel must be secured to a .10" spacer panel and a 1/4" thick backer panel, which slides into the trim.
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH FLUSH INSET INSTALLATION DUAL INSTALLATIONS A NOTES 75" (190.5) 26 3/16" (66.5) Finished Width 4 5/16" (10.9) 5 1/2" ELEC. ELEC. (13.9) 9" Trimmed freezers are designed to be customized with decorative panels. Field-installed 1/2" or 3/4" custom door, drawer and grille panels are required. For 3/4" raised panels, routing is required. The router depth is 1/4" all the way around the panel’s backs.
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH FLUSH INSET INSTALLATION FLUSH INSET 3/4" PANEL DIMENSIONS DUAL INSTALLATION A PANEL DIMENSIONS B Grille Panel A B 74" D D Door Panel Door Panel C NOTES D 10 7/16" 69 3/4" 36 7/8" C Trimmed freezers are designed to be customized with decorative panels. Field-installed 1/2" or 3/4" custom door, drawer and grille panels are required. For 3/4" raised panels, routing is required. The router depth is 1/4" all the way around the panel’s backs.
MONOGRAM 36" BUILT-IN ALL-FREEZER DUAL PRODUCT CLEARANCES 16 1/2" min (41.9) 1/2" To wall (1.3) 16 1/2" min (41.9) To wall ZIF360NHLH FLUSH INSET INSTALLATION NOTES A In a side-by-side installation of a left-and-right-hand door swing product, 1" clearance between the units is achieved naturally when installing trim-to-trim.
MONOGRAM 36" BUILT-IN ALL-FREEZER ZIF360NHLH FEATURES AND BENEFITS CUSTOM PANEL MODEL Can be personalized with cabinet-matching panels and handles FLUSH INSET INSTALLATION Allows the freezer to be installed flush with adjacent cabinetry ENHANCED TEMPERATURE MANAGEMENT SYSTEM With precise electronic controls and thermistors, maintains ideal storage conditions for frozen foods CONCEALED ICE DRAWER Provides quick and easy access to filtered ice GE WATER™ FILTRATION SYSTEM Provides clean, fresh-tasting water
