Specification Sheet
Product Specication Revised 10/21
SINGLE INSTALLATION
C
A minimum 6" (15.2) nished return matching cabinet exterior
recommended on interior on all sides and top at front of
opening
• Trimmed freezers are designed to be customized with decorative
panels. Field-installed 3/4" custom door panels are required.
• Maximum total panel weight:
30" door panel – 48 lbs.
Note: For panels constructed with rails and stiles (5-panel),
the rails and stiles must be a minimum of 2" wide.
• For Custom Panels: Use templates provided with units to pre-
drill holes for mounting panel brackets (provided with unit).
Adjustment screws and instructions also provided with units.
• Custom Panels require a custom handle from cabinet maker
or the ZKPN kit is required to mount a Statement handle or
Minimalist handle.
• Stainless steel handle and panel options:
ZK1SN309NLH: Left-hand 30" stainless steel door panel
ZK1SN304NRH: Right-hand 30" stainless steel door panel
ZKSP1H1CNSS: Minimalist handle
ZKSP1H1PNSS: Statement handle
PAGE 3 OF 6
For questions about your
appliance, please call 1-800-626-2000.
SIDE VIEW
25" (63.5)
FRONT VIEW
ELEC W
29 13/16" (75.7)
84"
(213.4)
ZIFP360NXLH
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
10 1/4"
(26.0)
6 1/4"
(15.9)
6"
(15.2)
2 1/2"
(6.4)
5"
(12.7)
4 3/8"
(11.1)
6"
(15.2)
Finished
Return
Back
Door
Panel
B
A
FLUSH 3/4" PANEL DIMENSIONS SINGLE INSTALLATION
C
WARNING:
When installing appliance, you must use and follow
the product installation instructions. These can be
found with unit or on web at monogram.com.
This document is intended for cabinet and panel
construction only.
HELPFUL TIPS
INTEGRATED INSTALLATION
A B
79 7/8" 29 9/16"
PANEL DIMENSIONS