Installation Sheet

CONTENTS
Important Information
Tools, Hardware ....................................................... 4
Parts Required .......................................................... 4
Caring for Your Stainless Steel ................................. 4
Design Guide (for ZIDS240)
The Installation Space ............................................... 5
Product Clearances ................................................... 5
Side-by-Side Installations ......................................... 5
Design Guide (for ZIDI240)
The Installation Space ............................................... 6
Product Clearances ................................................... 6
Side-by-Side Installations ......................................... 6
Installation Instructions
Step 1, Remove Packaging ....................................... 7
Step 2, Install Custom 3/4"
Drawer Panels and Handles
(ZIDI240 model only) ............................................. 7, 8
Step 3, Level ............................................................. 8
Step 4, Connect Power ............................................. 9
Step 5, Slide Product into Cutout ..............................9
Step 6, Set Temperature Controls ............................ 9
Important Information
ZIDI240 MODEL ONLY
PARTS REQUIRED
• Custom handles
• Overlay panels
• Spacer panels
• Backer panels
• Screws
PARTS SUPPLIED
• Drawer side trims
• Optional black or
stainless steel toekick
TOOLS REQUIRED
• Adjustable wrench
• Carpenter’s glue (ZIDI240 model only)
• Screwdriver (ZIDI240 model only)
CARING FOR YOUR STAINLESS
STEEL
• Before installation or first use, we strongly advise you
polish the stainless steel exterior and handles with a
commercially available stainless steel cleaner such
as Stainless Steel Magic
™
. To preserve and protect
the fine finish, we also strongly advise that you apply
stainless steel cleaner monthly.
REFRIGERATOR LOCATION
• Do not install the refrigerator where the temperature
will go below 55°F (12.7°C) because it will not run
often enough to maintain proper temperatures.
• Do not install the refrigerator where the temperature
will go above 100°F (37°C) because it will not
perform properly.
• Do not install the refrigerator in a location exposed to
water (rain, etc.) or direct sunlight.
• Install it on a floor strong enough to support it fully
loaded.
4 31-51545-5