Quick Specs

Product Specification Revised 1/18
STANDARD INSTALLATION
ANTI-TIP BRACKET
ZICP360NHRHMONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
NOTES
A
Mounting the junction box
in this location will also
allow for front accessibility
through access panel.
B
Water supply area.
WARNING:
The refrigerator is top heavy
and must be secured to
prevent the possibility of
tipping forward. Failure to
do so may result in death or
serious injury.
The information below is for
cabinet design only. When
installing the anti-tip system
you must use the product
installation instructions.
The information below
applies to all installation
constructions:
• A wall bracket, bolts and
toggles will be supplied
with the unit.
• The bolts will be used to
attach bracket to wall in
4 locations. Two of the
locations must penetrate
the center of the wall studs.
• The toggles are used for
stability in drywall and
when metal studs are
encountered. Lag bolts are
used in wood studs.
• In installation opening,
measure 81-1/2" from
floor and draw a horizontal
line.
• Locate and mark the wall
studs on horizontal line.
Verify at least two studs
have their centerlines
within the center 32-1/2"of
installation opening to
ensure 2 wall studs are
penetrated.
• The bracket will be
centered left to right in
opening with bottom
of bracket on the
horizontal line.
• When unit is placed in
opening, the bracket
tabs will align with
openings in back of the
unit. The unit will be
secured to the bracket
using supplied “L” bolts.
See Installation Instructions
for detailed instructions.
Use two
additional hole
locations at end
of brackets
Wall
Studs
Bracket
mounted
into vertical
wall studs
C
Ensure holes
selected are
centered on
the studs
L
FRONT VIEW OF CUTOUT
WITH ANTI-TIP BRACKET
24" (61.0)
2"
(5.1)
7/16" (1.1)
Trim overlap
4 3/4"
(12.1)
35 1/2" (90.2)
2 5/16"
(5.9)
*83 1/2" min
*84 1/2" max
(212.1-214.6)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
ELEC.
6"
(15.2)
10"
(25.4)
WATER
10" (25.4)
WATER
5"
(12.7)
5"
(12.7)
3 1/2"
(9.0)
SIDE VIEWFRONT VIEW
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
ZICP360NXRH
81 1/2"
(207.0)
Use two
additional hole
locations at end
of brackets
Wall
Studs
Bracket
mounted
into vertical
wall studs
C
Ensure holes
selected are
centered on
the studs
L
FRONT VIEW OF CUTOUT
WITH ANTI-TIP BRACKET
24" (61.0)
2"
(5.1)
7/16" (1.1)
Trim overlap
4 3/4"
(12.1)
35 1/2" (90.2)
2 5/16"
(5.9)
*83 1/2" min
*84 1/2" max
(212.1-214.6)
*Trim will overlap
additional 7/16"
3 1/2"
(8.9)
75"
(190.5 )
From floor
to bottom
of electrical
area
ELEC.
6"
(15.2)
10"
(25.4)
WATER
10" (25.4)
WATER
5"
(12.7)
5"
(12.7)
3 1/2"
(9.0)
SIDE VIEWFRONT VIEW
SIDE VIEW INSTALLED
WITH ANTI-TIP BRACKET
ZICP360NXRH
81 1/2"
(207.0)
A
B