Spec Sheet

PAGE 15 OF 17
For questions about your 
appliance, please call 1-800-626-2000.
Product Specication Created 10/19
FLUSH INSET INSTALLATION
HELPFUL TIPS
Trimmed refrigerators are designed 
to be customized with decorative 
panels. Field-installed 1/2" or 3/4" 
custom door, drawer and grille 
panels are required. For 3/4" raised 
panels, routing is required. e router 
depth is 1/4" all the way around 
the panel’s backs. Additional panel 
width reductions are required per 
the diagrams shown. is will create 
“picture frame’ routing allowing the 
panels to slide into the attached door, 
drawer and grille trims. 
A
  A separate 115V, 60Hz, 15- 
or 20-amp power supply is 
recommended for each product.
MAXIMUM TOTAL PANEL 
WEIGHT: 
• Fresh food door panels – 58 lbs. 
• Freezer drawer panel – 28 lbs. 
• Unified grille panel – 25 lbs
DOOR HANDLES 
Door handles not included.Custom 
handles supplied by your cabinet 
maker may be used.
Order ZKBFN720NII unification 
kit for an integrated appearance 
on 2 custom panel models installed 
side-by-side.
e 1/2" overlay panel must be 
secured to a .10" spacer panel and a 
1/4" thick backer panel, which slides 
into the trim.
ASSEMBLE THE PANELS WITH 
GLUE AND SCREWS: 
• Center the spacer panel on the backer 
panel, left to right and top to bottom. 
Secure the panels with glue.
• Refer to the chart for locating the 
backer panel to the overlay panel. 
Secure the overlay panel to the backer 
panel with glue and screws. Screws 
must be countersunk into the backer 
panel
FLUSH INSET 1/2" PANEL DIMENSIONS DUAL INSTALLATION
PANEL DIMENSIONS
Grille Panel
Fresh
Food
Panel
Freezer Drawer Panel
A
Fresh
Food
Panel
Freezer Drawer Panel
E
B
C
D
A B C D E
1/4" Backer Panel 69 7/8" 8 7/8" 46 1/16" 21 7/8" 33 7/8"
.10" Space Panel 68 1/2" 7 5/8" 44 11/16" 20 1/2" 32 1/2"
1/2" Overlay Panel 74 1/2" 10 11/16" 46 9/16" 22 7/16" 36 7/8"
3/4" OR 1/2" DUAL INSTALLATIONS
ZIC360NHLH_ZIC360NHRH
75" (190.5)
Finished Width
26 3/16" (66.5)
Min. Cutout Depth
24 3/16" (61.4)
4 5/16"
(10.9)
5 1/2"
(13.9)
9"
(22.9)
85"
(215.9)
Finished
Opening
3 1/2"
(8.9)
W
FRONT VIEW
ELEC.
5 1/2"
(13.9)
9"
(22.9)
3 1/2"
(8.9)
15" (38.1) min
To wall
15" (38.1) min
To wall
1"
(2.5)
115˚
Door swing
115˚
Door swing
75 1/2"
(191.8 )
From floor
to bottom
of electrical
area
ELEC.
SIDE VIEW
7"
(17.8)
7"
(17.8)
WATER
3 1/2"
(9.0)
WATER
3 1/2"
(9.0)
7 1/2"
(19.1)
7 1/2"
(19.1)
A










