Spec Sheet

PAGE 12 OF 17
For questions about your
appliance, please call 1-800-626-2000.
Product Specication Created 10/19
FLUSH INSET INSTALLATION
HELPFUL TIPS
3/4" RAISED GRILL PANEL ROUTING
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
DETAIL TOP
DETAIL BOTTOM
3/16"
1-11/16"
ROUTER DEPTH 1/4"
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE
2-1/16"
2-1/16"
ROUTER DEPTH 1/4" ROUTER DEPTH 1/4"
1/4"
3/32"
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
Trimmed refrigerators are designed
to be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door, drawer and grille
panels are required. For 3/4" raised
panels, routing is required. e router
depth is 1/4" all the way around
the panel’s backs. Additional panel
width reductions are required per
the diagrams shown. is will create
“picture frame’ routing allowing the
panels to slide into the attached door,
drawer and grille trims.
MAXIMUM TOTAL PANEL
WEIGHT:
• Fresh food door panels – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Grille panel – 11 lbs
NOTE: For panels constructed with
rails and stiles (5-panel), the rails
must be a minimum of 3" wide and
stiles must be a minimum of 4" wide.
DOOR HANDLES
Door handles not included.Custom
handles supplied by your cabinet
maker may be used.
Order ZKBFN720NII unification
kit for an integrated appearance
on 2 custom panel models installed
side-by-side.
3/4" RAISED DRAWER PANEL ROUTING
Front
NOTE: Routed areas should
be finished as they may be
visible when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
Front
NOTE: Routed areas should
be finished as they may be
visible when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
LEFT
SIDE
RIGHT
SIDE
Front
Back
3/4"
11/32"
1/4"
1/4"
1/4"
7/16"
DETAIL TOP
DETAIL BOTTOM
2 1/16" 2 1/16"
ROUTER DEPTH 1/4"
ROUTER DEPTH 1/4"
DETAIL
LEFT SIDE
DETAIL RIGHT
SIDE