Quick Specification

For questions about your
appliance, please call 1-800-626-2000.
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
OVERALL DIMENSIONS
AFTER PANEL INSTALL
FLUSH INSET
INSTALLATION
PAGE 9 OF 17 Product Specication Revised 2/20
† Dimensions include 3/4" custom cabinet panel
SPECIFICATIONS
Overall Width 38" (96.5 cm)†
Overall Height 84 1/2" (214.6 cm)†
Overall Depth 25 15/16" (65.9 cm)†
Door Clearance 38 3/4" (98.4 cm)
Cutout Width 39" (99.1 cm)
Cutout Height 85" (215.9 cm)
Cutout Depth 26 3/16" (66.5 cm)
Plumbing Requirements
1/4" OD copper tubing or
GE SmartConnect kit
Shipping Weight 640 lb (290 kg)
38" (96.5)
11 1/2"
(29.2)
26" (66.0)
* 84 1/2"
(214.6)
*73"
(185.4)
*26 7/16"
(67.1)
*4"
(10.2)
SIDE VIEWFRONT VIEW
* 83 1/2"
(212.1)
35" (88.9)
Case width
38 3/4"
(98.4)
TOP VIEW
ZIC360NHLH
** 4 9/16" (11.6) min
clearance to a wall
for 90˚ door swing
* Shipping height. Use leveling legs and wheels for maximum 1" height
adjustment from shipping height. Nominal installation height is 84”
20 5/8"
(52.5)
20 5/8" (52.4)
** Dimensions based on custom handle height of 2 9/16" (6.5).
** Allow 15" (38.1) min
clearance for 115˚
door swing
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply is required. An
individual properly grounded branch circuit or circuit breaker
is recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.