Quick Specification

PAGE 16 OF 17 Product Specication Revised 2/20
For questions about your
appliance, please call 1-800-626-2000.
FLUSH INSET INSTALLATION
HELPFUL TIPS
Grille Panel
Fresh
Food
Panel
Freezer Drawer Panel
A
Fresh
Food
Panel
Freezer Drawer Panel
E
B
C
D
A B C D E
74 1/2" 10 11/16" 46 9/16" 22 7/16" 36 7/8"
PANEL DIMENSIONS
FLUSH INSET 3/4" PANEL DIMENSIONS DUAL INSTALLATION
Trimmed refrigerators are designed
to be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door, drawer and grille
panels are required. For 3/4" raised
panels, routing is required. e router
depth is 1/4" all the way around
the panel’s backs. Additional panel
width reductions are required per
the diagrams shown. is will create
“picture frame’ routing allowing the
panels to slide into the attached door,
drawer and grille trims.
MAXIMUM TOTAL PANEL
WEIGHT:
• Fresh food door panels – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Unified grille panel – 25 lbs
DOOR HANDLES
Door handles not included.Custom
handles supplied by your cabinet
maker may be used.
Order ZKBFN720NII unification kit
for an integrated appearance on 2
custom panel models installed side-
by-side.
3/4" RAISED DOOR AND DRAWER PANEL ROUTING -
(SEE PAGE 11 FOR 3/4" GRILLE PANEL ROUTING DIAGRAMS)
TOP
FrontBack
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
Front
NOTE: Routed areas should
be finished as they may be
visible when assembled.
CORNER VIEW SHOWING
“PICTURE FRAME” ROUTING
Back
HINGE
SIDE
HANDLE
SIDE
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
3/4"
11/32"
1/4"
3/16"
1/4"
7/16"
DETAIL TOP
DETAIL BOTTOM
2 1/16"
3/16"
ROUTER DEPTH 1/4"
DETAIL HINGE
SIDE
DETAIL HANDLE
SIDE