Quick Specification
PAGE 15 OF 17 Product Specication Revised 2/20
For questions about your
appliance, please call 1-800-626-2000.
FLUSH INSET INSTALLATION
HELPFUL TIPS
Trimmed refrigerators are designed
to be customized with decorative
panels. Field-installed 1/2" or 3/4"
custom door, drawer and grille
panels are required. For 3/4" raised
panels, routing is required. e router
depth is 1/4" all the way around
the panel’s backs. Additional panel
width reductions are required per
the diagrams shown. is will create
“picture frame’ routing allowing the
panels to slide into the attached door,
drawer and grille trims.
A
A separate 115V, 60Hz, 15-
or 20-amp power supply is
recommended for each product.
MAXIMUM TOTAL PANEL
WEIGHT:
• Fresh food door panels – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Unified grille panel – 25 lbs
DOOR HANDLES
Door handles not included.Custom
handles supplied by your cabinet
maker may be used.
Order ZKBFN720NII unification
kit for an integrated appearance
on 2 custom panel models installed
side-by-side.
e 1/2" overlay panel must be
secured to a .10" spacer panel and a
1/4" thick backer panel, which slides
into the trim.
ASSEMBLE THE PANELS WITH
GLUE AND SCREWS:
• Center the spacer panel on the backer
panel, left to right and top to bottom.
Secure the panels with glue.
• Refer to the chart for locating the
backer panel to the overlay panel.
Secure the overlay panel to the backer
panel with glue and screws. Screws
must be countersunk into the backer
panel
FLUSH INSET 1/2" PANEL DIMENSIONS DUAL INSTALLATION
PANEL DIMENSIONS
Grille Panel
Fresh
Food
Panel
Freezer Drawer Panel
A
Fresh
Food
Panel
Freezer Drawer Panel
E
B
C
D
A B C D E
1/4" Backer Panel 69 7/8" 8 7/8" 46 1/16" 21 7/8" 33 7/8"
.10" Space Panel 68 1/2" 7 5/8" 44 11/16" 20 1/2" 32 1/2"
1/2" Overlay Panel 74 1/2" 10 11/16" 46 9/16" 22 7/16" 36 7/8"
3/4" OR 1/2" DUAL INSTALLATIONS
ZIC360NHLH_ZIC360NHRH
75" (190.5)
Finished Width
26 3/16" (66.5)
Min. Cutout Depth
24 3/16" (61.4)
4 5/16"
(10.9)
5 1/2"
(13.9)
9"
(22.9)
85"
(215.9)
Finished
Opening
3 1/2"
(8.9)
W
FRONT VIEW
ELEC.
5 1/2"
(13.9)
9"
(22.9)
3 1/2"
(8.9)
15" (38.1) min
To wall
15" (38.1) min
To wall
1"
(2.5)
115˚
Door swing
115˚
Door swing
75 1/2"
(191.8 )
From floor
to bottom
of electrical
area
ELEC.
SIDE VIEW
7"
(17.8)
7"
(17.8)
WATER
3 1/2"
(9.0)
WATER
3 1/2"
(9.0)
7 1/2"
(19.1)
7 1/2"
(19.1)
A